New Posts  All Forums:Forum Nav:

UK Meet (Tips For Newbies) - Page 2

post #16 of 27
Quote:
Originally Posted by suicidal_orange View Post
... when do you need the details by?
No later than the Thursday/Friday before the meet
post #17 of 27
Well to be honest it survived just with the volume been put to zero.

I'm not 100% about the best way to treat my millett max with regards removing phones.

To be honest i'm not a fan of switching electrical items on and off to often anyway.

John
post #18 of 27
Quote:
Originally Posted by seroxatmad View Post
Well to be honest it survived just with the volume been put to zero.

I'm not 100% about the best way to treat my millett max with regards removing phones.

To be honest i'm not a fan of switching electrical items on and off to often anyway.

John
This quote is from the MAX technical overview page

Quote:
Finally, for the ultimate in convenience and protection of your headphones, a small version of Amb's (Ti Kan) e12 delay circuit is used, resulting in 10-15sec power delay and protective cutoff. No need to unplug your phones upon power on or power off.
post #19 of 27
But does that mean you can un plug while its still powered?

The delay is also to allow the tubes heaters to stabilize etc.

Cheers

John
post #20 of 27
Quote:
Originally Posted by seroxatmad View Post
But does that mean you can un plug while its still powered?

The delay is also to allow the tubes heaters to stabilize etc.

Cheers

John
I've unplugged the headphones from my MiniMAX while it's still on a few times, no problem (I've just cursed myself)

But you might as well err on the side of caution IMO
post #21 of 27
Mike - there's an "h" in Oehlbach iirc . Just didn't want you to have a typo, enjoy the meet friend.
post #22 of 27
Thread Starter 
Hey guys, im going to order the rig card holders/stands later today. Anyone else want one?

Pete
post #23 of 27
Quote:
Originally Posted by Aura View Post
Mike - there's an "h" in Oehlbach iirc . Just didn't want you to have a typo, enjoy the meet friend.
So there is, the worst thing is that I copied it off of the jack to make sure I spelt it right.

Thanks
post #24 of 27
Quote:
Originally Posted by tudj View Post
I've made a simple sheet for the stand.

If anyone wants me to do one for them, PM me and I'll sort you out.

Would be great Tudj if you could print me one of those.Let me know if it's ok and i will PM the details.Cheers.
post #25 of 27
Quote:
Originally Posted by alvin sawdust View Post
Would be great Tudj if you could print me one of those.Let me know if it's ok and i will PM the details.Cheers.
Sure, send your info in a PM
post #26 of 27
Thread Starter 
Hi Guys
Just picked up the stands (Thanks Royal Mail)
The seller has sent A6 landscape instead of Portrait. I've contacted Tudj. Just wanted to let anyone know who was making their own.
post #27 of 27
Quote:
Originally Posted by 03029174 View Post
Hi Guys
Just picked up the stands (Thanks Royal Mail)
The seller has sent A6 landscape instead of Portrait. I've contacted Tudj. Just wanted to let anyone know who was making their own.
Good stuff Pete
New Posts  All Forums:Forum Nav: