Head-Fi.org › Forums › Equipment Forums › Portable Headphones, Earphones and In-Ear Monitors › Unique Melody Remold Appreciation and Impressions Thread
New Posts  All Forums:Forum Nav:

Unique Melody Remold Appreciation and Impressions Thread - Page 13

post #181 of 3646
10/8/09 at 7:18pm
Thread Starter 
Quote:
Originally Posted by BBY03evo View Post
Oh I thought there was, my bad. What triples do you think would work well?
Well there aren't any triple drivers that have a 3-way crossover except the W3 and UM3X. I'm not sure if you can combine two pairs together, but ti's a thought. The TF10 has two low/mid drivers and a high driver, where as the SE530 has Two low drivers and a high/mid driver. So combining two pairs together would mean you would either have four low, or four low/mid, Which would be a bit of waste for drivers since it would be better to have two lows and two mids.
Reply

Gear mentioned in this thread:

post #182 of 3646
10/8/09 at 8:25pm
Quote:
Originally Posted by motorbit View Post
i have custom cables with my tf 10. will they still fit aftre remolding? the plugs fit the original tf10 shell, but are a bit longer than the original plugs where.
You can tell them you want "custom sockets," which will fit your custom cable perfectly. The plugs will sit flush with the shell that way. If you didn't specify the type of sockets, then I believe they will use the original "universal" socket. So the custom cable will fit the same as before. There was a place on the order form under "Special Request" for your choice. Just contact them and tell them you'd like custom sockets.
Reply
post #183 of 3646
10/9/09 at 5:45am
hi im from singapore so most lykly i will do it at null audio total cost is 450sgd around ther want to know is it worth going for the xtra driver or juz remould it wifout the xtra driver and i listen to metal music and pair it wif my iphone isit good for my kind of song im a guy who goes for details and the live experience bass is least of my concern as long its not artificial and over whelming
Reply
post #184 of 3646
10/9/09 at 6:50am
Quote:
Originally Posted by noobzpro View Post
hi im from singapore so most lykly i will do it at null audio total cost is 450sgd around ther want to know is it worth going for the xtra driver or juz remould it wifout the xtra driver and i listen to metal music and pair it wif my iphone isit good for my kind of song im a guy who goes for details and the live experience bass is least of my concern as long its not artificial and over whelming
sorry man.. but the 'fullstop' key is near the bottom right of the keyboard. please use it!
Reply
post #185 of 3646
10/9/09 at 6:56am
Quote:
Originally Posted by jfunkie View Post
sorry man.. but the 'fullstop' key is near the bottom right of the keyboard. please use it!
Yeah... Even coming from Singapore, I'm having trouble too.
Reply
post #186 of 3646
10/9/09 at 7:57am
Haha, sorry guys. Mainly as i said im from singapore, and i own a few iem mainly the triplefi10, klipsch image x10, future sonic atrios. Im in love with the jh-13, but as im still in secondary school its not a wise choice. So i was checking null-audio out and noticed 450sgd to remould and add 1 more driver to the tf10. Its very tempting but as stuff are from china, im quite scared it would ruin the tf10 so any suggestion or opinions of people who have their tf remould and the xtra mid-range added. Thanks in advance.
Reply
post #187 of 3646
10/9/09 at 7:59am
Quote:
Originally Posted by noobzpro View Post
Haha, sorry guys. Mainly as i said im from singapore, and i own a few iem mainly the triplefi10, klipsch image x10, future sonic atrios. Im in love with the jh-13, but as im still in secondary school its not a wise choice. So i was checking null-audio out and noticed 450sgd to remould and add 1 more driver to the tf10. Its very tempting but as stuff are from china, im quite scared it would ruin the tf10 so any suggestion or opinions of people who have their tf remould and the xtra mid-range added. Thanks in advance.
You can try going to stereo?
I'm sure they're much more reputable and many people have already done it and are very happy with them
Reply
post #188 of 3646
10/9/09 at 10:43am
Quote:
Originally Posted by noobzpro View Post
Haha, sorry guys. Mainly as i said im from singapore, and i own a few iem mainly the triplefi10, klipsch image x10, future sonic atrios. Im in love with the jh-13, but as im still in secondary school its not a wise choice. So i was checking null-audio out and noticed 450sgd to remould and add 1 more driver to the tf10. Its very tempting but as stuff are from china, im quite scared it would ruin the tf10 so any suggestion or opinions of people who have their tf remould and the xtra mid-range added. Thanks in advance.
If you're worried about them physically screwing up your TF10, I haven't seen anything negative about UM's remolding service regarding spoilt drivers or sound problems.

Here is Scott Tarlow's review on his remolded TF10s. Not sure if there's an extra driver in there though.
Reply
post #189 of 3646
10/9/09 at 11:18am
Quote:
Originally Posted by sphb View Post
You can try going to stereo?
I'm sure they're much more reputable and many people have already done it and are very happy with them
yea i always get my stuff from stereo.. nice n helpful people.. too bad im not in sg now so im trying to contact UM direct.. but yet to no avail..

guess i'll have to to go pay them a visit when i return..
Reply
post #190 of 3646
10/9/09 at 11:22am
Maybe you can try emailing them if you'll be back in Singapore within a month?
I'm sure you can work something out. Say... You pay them by credit card and they tell you the address to send your TF10 and impressions to then you collect it when you come back to Singapore?
Reply
post #191 of 3646
10/9/09 at 2:58pm
Hi, so stereo are also in charge of um?? Do they have lyk demo units?? And where is the cheapest place to get my ear impression done? Thanks in advance.
Reply
post #192 of 3646
10/9/09 at 3:00pm
Quote:
Originally Posted by noobzpro View Post
Hi, so stereo are also in charge of um?? Do they have lyk demo units?? And where is the cheapest place to get my ear impression done? Thanks in advance.
Yes Stereo is the distributer. I don't think they have demo units.
SGD30 at the Carlton Hotel(Beside CHIJMES) 1st floor
Reply
post #193 of 3646
10/9/09 at 6:06pm
Does anyone know if they can remold single driver IEMs like the super.fi studio3? I see that model on a list made completely in chinese so I have no idea what it says. If I can get these remolded for $88 plus impressions, I am in.
Reply
post #194 of 3646
10/9/09 at 6:52pm
Sam told me single drivers weren't a problem when I was discussing it with him. You might ask him specifically about yours though. I don't think enclosing a single armature would be no problem at all. They already do several high-end single driver IEMs that are diaphragms, I imagine an armature is even easier to enclose.
Reply
post #195 of 3646
10/9/09 at 8:01pm
Thread Starter 
Quote:
Originally Posted by kb1gra View Post
Does anyone know if they can remold single driver IEMs like the super.fi studio3? I see that model on a list made completely in chinese so I have no idea what it says. If I can get these remolded for $88 plus impressions, I am in.
It isn't a problem, just get get a hold of Sam. You also have to pay for shipping.
Reply
New Posts  All Forums:Forum Nav:
  Return Home

Gear mentioned in this thread:

Head-Fi.org › Forums › Equipment Forums › Portable Headphones, Earphones and In-Ear Monitors › Unique Melody Remold Appreciation and Impressions Thread