Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › The Beyerdynamic DT880 Discussion thread
New Posts  All Forums:Forum Nav:

The Beyerdynamic DT880 Discussion thread - Page 298

post #4456 of 8253

Ok I was out on the deck listening to the EFi-82MT's (Closed version of the DT880's Mshenay :P )

 

Came in took a picture with the phone and that schiit HTC decided it wanted to reset... Any way put everything back together and the phone decided it would dump the pictures... :mad:

 

Here is a picture of the DT880 I took a couple of days ago.

You need to stick a thin screwdriver or knife blade in any of the red areas on the picture.

Pry back and work the ring up till it's free, it just snaps in with 3 tang around the ring.

 

DO NOT go too deep as the driver base is right underneath the foam piece and you can puncture the cloth material really easily.

 

When you flip the driver out of the cup (the whole disk come out) do so very gently.

 

***THE TANGS THAT THE HEADPHONE CABLE AND VOICE COIL WIRES CONNECT TO ARE JUST PRESSED INTO THE PLASTIC AND WILL PULL FREE VERY EASILY***

 

Sorry for the above but it cannot be stressed enough,  liquidzoo any myself had to reconnect hair thin voice coil wires to fix out drivers, we were lucky.


Sorry it took so long good luck and if you need help just ask.

:beerchug:

post #4457 of 8253

These are the Tangs on the back side of my driver that will pull free very easily.

post #4458 of 8253
Great, thanks for the pics!
post #4459 of 8253

Hope you get your problem sorted out easily.

post #4460 of 8253
Quote:
Originally Posted by TrollDragon View Post
 

Ok I was out on the deck listening to the EFi-82MT's (Closed version of the DT880's Mshenay :P )

 

Well I am BROKE now, and seeing as I own a Shure 840... I have the pads lying around. Although honestly I think the Modded Shure will be my best bet, I know how EPIC Dynamat made my w1000x, so any one who's put some SERIOUS time to do a Dynamat mod to any headphone... said headphone should be a winner [and it cost me $140] All in all the Sale of my K550 and C5 got me 1 amp and two other cans :D 

 

Looking forward to reviewing ALL THESE CANS soon 

 

I might even start a Sub $200 MID FI Grudge Match Thread 

post #4461 of 8253
Quote:
Originally Posted by Mshenay View Post
 

Shure 840... I have the pads lying around.

 

Looking forward to reviewing ALL THESE CANS soon 

 

I might even start a Sub $200 MID FI Grudge Match Thread 

I'll take those pads if the are not being used... :)

 

Yes you need to get down to some serious listening and composing.

I possibly need a good can for my Marley / Tosh collection, my 'Sones bring out da sweet riddum's but I and I know there d'ere is always bettah!

 

Also there are way too many cans in the sub $200 arena to start a grudge match IMHO but you are welcome to try. :D

post #4462 of 8253
Quote:
Originally Posted by TrollDragon View Post
 

I'll take those pads if the are not being used... :)

 

Yes you need to get down to some serious listening and composing.

I possibly need a good can for my Marley / Tosh collection, my 'Sones bring out da sweet riddum's but I and I know there d'ere is always bettah!

 

Also there are way too many cans in the sub $200 arena to start a grudge match IMHO but you are welcome to try. :D

 

Pff Mad Lust Envy has teh gaming thread, I can manage the Sub $200 shoot out! and the 840 pads are not lying around they are on my ShurEY 840

 

honestly, I love reggae on my dt 880 only

post #4463 of 8253
Quote:
Originally Posted by Mshenay View Post
 

Well I am BROKE now, and seeing as I own a Shure 840... I have the pads lying around. Although honestly I think the Modded Shure will be my best bet, I know how EPIC Dynamat made my w1000x, so any one who's put some SERIOUS time to do a Dynamat mod to any headphone... said headphone should be a winner [and it cost me $140] All in all the Sale of my K550 and C5 got me 1 amp and two other cans :D 

 

Looking forward to reviewing ALL THESE CANS soon 

 

I might even start a Sub $200 MID FI Grudge Match Thread 

That's a great idea. 

 

Maybe call it "Mshenay's Ultimate Sub $200 Cans Battle". 

 

It would make a great source of info for newbies in the introduction forums looking for starter headphones. 

post #4464 of 8253
post #4465 of 8253
Quote:
Originally Posted by TrollDragon View Post
 

Thats too bad.

 

You should be able to contact either of these two distributors listed in the link below. They should be able to obtain a driver for you or point you to the right place to get one.

http://europe.beyerdynamic.com/distributors/worldwide.html?id=99&user_distributors_pi2%5Bcountry%5D%5B%5D=NLD&submit_ie=1&user_distributors_pi2%5Bsubmit%5D=Find

 

Good Luck!

 

I've just (finally!) received a replacement DT880 driver.  However, i need a replacement driver for the LEFT can, it looks like they've sent me a replacement driver for the RIGHT (the red pen mark is on the opposite terminal to my blown LEFT driver).

 

Are the left/right drivers physically different?  Can i just use the driver they sent and wire it up with the left/right wires inverted?

post #4466 of 8253

 

Don't mind me, just testing out my HTC's camera in low light with my bad photography skills :beyersmile:

 

Also, my 500th post :D

post #4467 of 8253
Quote:
Originally Posted by xkonfuzed View Post
Don't mind me, just testing out my HTC's camera in low light with my bad photography skills :beyersmile:

 

Also, my 500th post :D

Nice & Congrats!

 

post #4468 of 8253
Quote:
Originally Posted by TrollDragon View Post
 

Nice & Congrats!

 

 

-.- go fall in a freezing well Troll [you and your awesome pics] so any one got a suggestion for a $200 dollar or so Digital Camera? I need something to take awesome pics of my Dt 880 [so thread relvant <3] 

post #4469 of 8253
Quote:
Originally Posted by vacious View Post

Quote:
Originally Posted by TrollDragon View Post

 
Thats too bad.

You should be able to contact either of these two distributors listed in the link below. They should be able to obtain a driver for you or point you to the right place to get one.
[URL=http://europe.beyerdynamic.com/distributors/worldwide.html?id=99

I've just (finally!) received a replacement DT880 driver.  However, i need a replacement driver for the LEFT can, it looks like they've sent me a replacement driver for the RIGHT (the red pen mark is on the opposite terminal to my blown LEFT driver).

Are the left/right drivers physically different?  Can i just use the driver they sent and wire it up with the left/right wires inverted?
On my replacement driver, the red mark designates the positive/signal side!
post #4470 of 8253
Quote:
Originally Posted by TrollDragon View Post
 

Nice & Congrats!

 

They look sexy without the stock cable :p.

 

You're like the Chuck Norris of photography. 

 

Quote:
Originally Posted by Mshenay View Post
 

 

-.- go fall in a freezing well Troll [you and your awesome pics] so any one got a suggestion for a $200 dollar or so Digital Camera? I need something to take awesome pics of my Dt 880 [so thread relvant <3] 

Ask here >>> http://www.head-fi.org/t/256063/post-your-photography-here-2-new-dial-up-800x600-friendly/11280 

They look like they know their stuff :D 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › The Beyerdynamic DT880 Discussion thread