Head-Fi.org › Forums › Equipment Forums › Portable Headphone Amps › Setting Corda 2Move/3Move to Low Gain?
New Posts  All Forums:Forum Nav:

Setting Corda 2Move/3Move to Low Gain?

post #1 of 3
5/21/09 at 8:59am
Thread Starter 
Heeelp!

I've got a Corda 2Move and I'm trying to figure out how to set it to low gain.

I've read the manual, opened it up and looked inside.

I've know nothing about the technology in these things, btw.

But anyways, I see the metal-like thingies that are standing up. Then there are black plastic-like thingies at the sides of some of them. And there are also metal-like thingies across the ones that are standing up.

I've got a pair of tweezers right now - what do I do?

Do I just pull up on the metal things that are lying horizontally? What about the black parts..?

Thanks!
Reply
post #2 of 3
5/21/09 at 11:24am
2MOVE and 3MOVE doesn't look alike. While 2MOVE uses jumpers, 3MOVE has switches.

You just unplug the jumpers (the black plastic with a tiny piece of metal inside) behind the output socket, then plug them back in the low gain position on the metal pins.


LL
Reply
post #3 of 3
5/21/09 at 5:01pm
ClieOS speaks truth. Just pull the little black plastic thing up and off of the pins, then re-seat to whatever setting it is you're changing to. Hard to really mess up, unless you somehow bend the pins and break them or zap the whole thing with a bunch of static electricity or something.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Headphone Amps
Head-Fi.org › Forums › Equipment Forums › Portable Headphone Amps › Setting Corda 2Move/3Move to Low Gain?