Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › How to recable my Koss KSC-75? Please help! ^ ^
New Posts  All Forums:Forum Nav:

How to recable my Koss KSC-75? Please help! ^ ^ - Page 2

post #16 of 23
4/16/09 at 9:01am
yes thats the silver.

If its popped in and squashed just make sure your holding it driver face down and then slam it not massively hard onto a flat desk and it should pop the driver out. Some people have also used tape to try that but a short sharp bang shouldnt damage anything and provide enough force to pop it back out the right way.
Reply
post #17 of 23
2/23/10 at 6:01pm
How do you know which wire is the negative/positive or which is the ground?
Reply
post #18 of 23
2/23/10 at 7:03pm
Multimeter is your friend.

Or, in case you don't have it, open the covers on both drivers, the ground wires will have the same colors (orange).
Reply
post #19 of 23
3/6/10 at 3:29pm
Is there a good budget ready made cable to buy?
Reply
post #20 of 23
1/25/11 at 4:30pm

Bump. Does somebody have a tutorial for this or any help? I want to put a four pin on a pair of KSC75s. What kind of solder would work well?

Reply
post #21 of 23
1/26/11 at 10:52am

Take your pick of any eutectic solder. If you have environmental concerns pick an ROHS version.

Reply
post #22 of 23
1/26/11 at 1:24pm
Quote:
Originally Posted by nikongod View Post

Take your pick of any eutectic solder. If you have environmental concerns pick an ROHS version.


Thanks. 

Reply
post #23 of 23
2/8/11 at 6:44am

edit: nevermind.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › How to recable my Koss KSC-75? Please help! ^ ^