Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › Sansa clip vs. Fuze SQ?
New Posts  All Forums:Forum Nav:

Sansa clip vs. Fuze SQ?

post #1 of 12
1/17/09 at 5:45pm
Thread Starter 
Hello Headfiers
I have got a clip, but im considering a fuze because I like display better and expandable... But which one has got the best SQ overall?
Reply
post #2 of 12
1/17/09 at 7:21pm
They're the same... Taking 5 seconds to search would tell you the same thing.
Reply
post #3 of 12
1/19/09 at 2:23am
Yep, although if I were you and had the extra cash laying around, I would consider picking upu the Fuze also.

That way you can have a dap for certain types of music (if you have too much music to fit on 1 device)
Reply
post #4 of 12
1/19/09 at 9:29pm
someone said that they come with same chips. I think their sq are the same
Reply
post #5 of 12
1/19/09 at 10:05pm
Yes, they should be the same. Only the Fuze is a little more robust at the expense of size (though still appropriately portable).
Reply
post #6 of 12
1/19/09 at 11:38pm
does the sansa line have a LOD like ipods? or do you just run an IC via HP?
Reply
post #7 of 12
1/20/09 at 12:11am
Quote:
Originally Posted by patwrik View Post
does the sansa line have a LOD like ipods? or do you just run an IC via HP?
no, the sansa is a mini-connection.
Reply
post #8 of 12
1/21/09 at 12:55am
Quote:
Originally Posted by Young Spade View Post
Yep, although if I were you and had the extra cash laying around, I would consider picking upu the Fuze also.

That way you can have a dap for certain types of music (if you have too much music to fit on 1 device)
The Fuze also has a Micro SD memory slot for expansion. I finally decided on the Fuze over Sony because of that. Bought a 4gb for $48.00 on "Black Friday"
Reply
post #9 of 12
1/25/09 at 11:07am
Fuze does have a line-out signal in the dock connection, but activate it requires a small voltage (about 1V) to pin7 (IIRC). That is how Griffin dock for Sansa activates the line-out signal from Fuze (by drawing 1V from USB power to that pin). Someone already DIY'ed a working LOD for the Fuze by reverse engineering the Griffin dock. I am planning of making one myself within next few weeks.
Reply
post #10 of 12
1/26/09 at 2:18am
Quote:
Originally Posted by ClieOS View Post
Fuze does have a line-out signal in the dock connection, but activate it requires a small voltage (about 1V) to pin7 (IIRC). That is how Griffin dock for Sansa activates the line-out signal from Fuze (by drawing 1V from USB power to that pin). Someone already DIY'ed a working LOD for the Fuze by reverse engineering the Griffin dock. I am planning of making one myself within next few weeks.
Could you please start a thread or PM me letting us know how this project goes(?)! As a brand new owner of a Fuze, I have been very curious & looking for info on the potential of the dock port as a possible line-out. Thanks in advance!
Reply
post #11 of 12
1/26/09 at 3:03am
There's already threads on it, I think I made one in the DIY section.

Here's what inspired my thread here:

DIY Line Out Cable - Works! - Sansa Fuze - Welcome to SanDisk's Sansa Community
Reply
post #12 of 12
1/26/09 at 5:12am
Yeah, that's the thread to read if you are looking for DIY'ing a LOD for Fuze. I already have all the parts I need to make the LOD except the extra sync cable I ordered. My version will be closer resemble the Griffin dock as I do plan to put in a pair of decoupling caps and may be some step down resistor to limit the voltage coming from pin 22 to pin7. I'll make a guide if everything goes well.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › Sansa clip vs. Fuze SQ?