Wadia iTransport and 5.5G iMod

Yes, they are compatible.

Do you know this from experience?

I am also interested in understanding some of the dependencies of this - like I posted in the digital source forum:

The point to me is:
- would the digital out work on the 5.5G iMOD same as for a stock 5G
- would the analog out (as it has no CAP in the signal path in the iMOD) break anything in the Wadia -> according to Wadia the analog seems to be a 'path through', so I guess it shouldn't but want to make sure
- it is my understanding to use the analog out (provided it does not break anything inside - see above) it would require a cap solution to be inserted after the analog RCAs (like portable VCAP)

I would really appreciate if anyone can elaborate on this.

Thanks!

I have an iTranport and an iMod. Tried them and they work.

The iMod will just work as a HDD transport when docked onto the iTransport, meaning the mod(iMod) done to the ipod is renderred useless, so you would get the same results if you were to dock a normal 5G ipod.

As for the analog path, I have not tried them though. Maybe when I have the trime, I will try to measure the DC offset from the iTransport analog out when my iMod is docked.

Thank You!
And yes, if you ever get a chance of checking the analog out that would be very appreciated.

Cheers.

All,

If you are using the 5G/5.5G iMod with the iTransport, you really ought to be using an external dac. This is the point of using the iTransport - to get the s/pdif digital output signal (via the coax jack).

If you try to connect the iMod to the iTransport's analog outputs, you won't have the dc blocking caps in the path (since the iTransport's analog output is a pass-through from the line out dock of the iPod), so you'll have dc offset voltage on the output - this is no good and NOT recommended!

So I recommend if you are using the iMod with an iTransport, use the digital output to an external dac. If you want to use the iMod's analog output (taken directly from the Wolfson dac), you need to use the ALO iMod dock cable (with the built-in black gate caps) or dock unit (Vcap, Auricap).

Regarding questions I have received about "which is better, iTransport or iMod," this really depends on the dac you are using with the iTransport and your tastes in sound. You may prefer the sound of the iMod to a certain external dac unit connected to the iTransport, and vice versa. As a transport, the iTransport is certainly not a low-jitter design - but it gets the job done and I think it is a good value.

best regards,

Vinnie

Ok, let's keep this going now that we have few experts checking in

I'm using my iTransport with a good reclocking DAC (Chord DAC64) ...am I fully getting rid of the jitter? (I realize the iTransport uses some so-so parts).

I'll be adding a 2nd iTransport upstairs (yes I like the utility of these and the "semi" high end sound), but I won't have the luxury of Chord DAC in that system. Is there anything that can be inserted between iTransport (digital) and the DAC to reduce jitter? and will that be effective?

Good to know that the iMod and iTransport are compatible if I just use digital out (which is the whole point of the iTransport anyway).

iMod 5.5G > Wadia iTransport works.

To eliminate the jitter, and to upsample, I am going to add a Monarchy Audio DIP 24/96 before my moodlab dac (which although it can handled LPCM at 96 will not on its own upsample the 44.1 wav files on the iMod).

This will be a kewl system for the office, where the goal is to get people to ask "what's this" and "what's that". Then in to the Head-Direct EF1 with an RCA cleartop and Denon D1001's re-cabled by MarkL (closed, contain well, let in outside sound like the phone which is important for the office, and not too big or geeky).

All cute little boxes. I am going to set it all up this weekend (all gear in hand) and see how it sounds. I might add a vintage Sony Walkman 555 which has optical out since the DIP has a handy switch for selecting the Tos or RCA digital-in. Now I can listen to CD's as well.

Take the iMod home every night, and use it as a real iMod with the ALO cap cable and an iQube when on the road.

Added: another approach for the office desktop, which I suggested in an earlier thead, is to connect the Wadia to a single box solution: DAC+HP Amp. A good DAC will re-clock and handle the jitter issue. The RWA one suggested below by ALO looks fantastic and I bet it sounds phenomenal, but $6K is too rich for me, and I would be afaid to leave it at the office. A used Benchmark DAC-1 (no USB) can be had for $725 or so, and has HP out. Steve at Empirical Audio will mod the HP amp which doubles the price, but might be worth it (I got the used DAC-1, but haven't ordered the upgrade. I want to compare it to the DIP+moodlab combo). Steve can also add even more jitter reducing magic if you have the bucks.