Interested in trade for Yuin OK1 or Minibox-E+, Grado RS1 + cash difference.
Amp is very clean, works like new and sounds exceptional. I am the 2nd owner, bought it 4 months ago when it had 100 hrs of burn-in and usage. iQube's warranty is limited to original purchaser only. I have feedback here and Ebay under the same username. If you have any questions, feel free to PM me. I ship same day or next day. Additional Shipping for International.
iQube $old
With the iQube you will get
- USB charging cable
- 1 unused iQube band, 1 used iQube band,
- mini to mini cable
- rechargeable batteries already installed inside.
- retail box
- user manual
Review Links
http://www.head-fi.org/forums/f5/rev...7/#post3954175
http://www.head-fi.org/forums/f5/lis...5/#post3907545
http://www.head-fi.org/forums/f5/iqu...9/#post3891997
Specifications
Lightweight, portable Headphone amplifier
High efficiency (90-95%) Class D amplifier
Runs on 4x AAA alkaline or rechargeable batteries, user replaceable
8-fold output buffer for a (near to) load independent output behaviour
4th order feedback loop for minimum distortion
Fixed, phase-shifted carrier wave oscillator decreases inter-channel distortion
Ultra low noise front end accepts any line level source without the need for impedance matching
Top A-grade components used:
Medical graded double layer epoxy using HOFC (High Oxygen Free Copper)
Optimised board design enhances signal quality
Alps potentiometer
Visay series 036 decoupling capacitors throughout
Panasonic stack film capacitors
Carbon signal resistors
Lumberg I/O connectors
Fully RoHS compliant
Retro art design, CNC machined aluminium casing
Rubber touch feel painted covers
Technical Specifications
Input impedance:
10k ohm
Voltage gain:
low gain: 2
high gain 7
Frequency response @ 200 mV into a 16 Ohm load:
5 - 50 kHz. (-1 dB)
Maximum output power per channel from 20-20,000Hz:
160 mW_16 ohm
80 mW_32 ohm
12 mW_200 ohm
Output impedance:
<0,1 ohm @ f<5kHz
< 1,5 ohm @ 20kHz
THD at 200mV output (typ) 0.01%:
(max) 0.03%.
Output noise:
10uV (unweighted)
Charge input:
any DC voltage between 5V and 20V, polarity protected
battery charge current: 0,3A
typical charger current consumption @ 5Vdc input: 0,4A
typical charger current consumption @ 20Vdc input: 0,1A
Dimensions:
Height: 23 mm
Width: 63 mm
Lenght: 107mm (incl volume knob)
Front w/ accesories
Back
Bottom
Amp is very clean, works like new and sounds exceptional. I am the 2nd owner, bought it 4 months ago when it had 100 hrs of burn-in and usage. iQube's warranty is limited to original purchaser only. I have feedback here and Ebay under the same username. If you have any questions, feel free to PM me. I ship same day or next day. Additional Shipping for International.
iQube $old
With the iQube you will get
- USB charging cable
- 1 unused iQube band, 1 used iQube band,
- mini to mini cable
- rechargeable batteries already installed inside.
- retail box
- user manual
Review Links
http://www.head-fi.org/forums/f5/rev...7/#post3954175
http://www.head-fi.org/forums/f5/lis...5/#post3907545
http://www.head-fi.org/forums/f5/iqu...9/#post3891997
Specifications
Lightweight, portable Headphone amplifier
High efficiency (90-95%) Class D amplifier
Runs on 4x AAA alkaline or rechargeable batteries, user replaceable
8-fold output buffer for a (near to) load independent output behaviour
4th order feedback loop for minimum distortion
Fixed, phase-shifted carrier wave oscillator decreases inter-channel distortion
Ultra low noise front end accepts any line level source without the need for impedance matching
Top A-grade components used:
Medical graded double layer epoxy using HOFC (High Oxygen Free Copper)
Optimised board design enhances signal quality
Alps potentiometer
Visay series 036 decoupling capacitors throughout
Panasonic stack film capacitors
Carbon signal resistors
Lumberg I/O connectors
Fully RoHS compliant
Retro art design, CNC machined aluminium casing
Rubber touch feel painted covers
Technical Specifications
Input impedance:
10k ohm
Voltage gain:
low gain: 2
high gain 7
Frequency response @ 200 mV into a 16 Ohm load:
5 - 50 kHz. (-1 dB)
Maximum output power per channel from 20-20,000Hz:
160 mW_16 ohm
80 mW_32 ohm
12 mW_200 ohm
Output impedance:
<0,1 ohm @ f<5kHz
< 1,5 ohm @ 20kHz
THD at 200mV output (typ) 0.01%:
(max) 0.03%.
Output noise:
10uV (unweighted)
Charge input:
any DC voltage between 5V and 20V, polarity protected
battery charge current: 0,3A
typical charger current consumption @ 5Vdc input: 0,4A
typical charger current consumption @ 20Vdc input: 0,1A
Dimensions:
Height: 23 mm
Width: 63 mm
Lenght: 107mm (incl volume knob)
Front w/ accesories
Back
Bottom
