Pictures of Your Portable Rig [Part XIII] - Page 146  

Cheeky

baines, almost bought the onto myself to see if the ear pads would fit on the koss 75's.

What do they sound like? For 12 quid can't expect much but whaddya think of em?

double post

Well, they are better than I expected, and originally thought. The highs are quite scratchy/tinny at the top top end, but the bass is not a muddy messy layer/film, quite detailed and very deep, especially when you push on the cups too. They sound better amped through the (bassyish) Tomahawk surprisingly (does'nt kill highs/muddy/overrun them with bass) and the D2 BBE (especially the D2+'s BBE+) they are even better (4 BBE,4 M3B.......)

With a little light headband bending, and getting the headband not too loose (there is a sweet spot for me) I can hear a difference. They are a bit tighter and better sounding now, but not perfect. If you wear them the wrong way round though (how I did before I found L and R) the cups don't turn in (only turn one way) and have no bass detail at all, awful. Even when fitted right I still hate the tinny highs though... Anyone think of some mods?

Anyway, if they are fakes they sound better than I expected originals to sound!

Oh, and never take the pads off if you don't have to! I did to see which way the lines on the driver went (fake vs. original. eBay auction says they are real, but I wouldn't be so sure, he may be trying to prove his are real?)

Matt

My first picture post

I should be enjoying this for a long time.

Oh so tempting... Fortunately I have a very good fit with the stock tips, but £88 isn't too bad for a custom IE 8 tips. Decisions decisions...

my simple portable setup. i lost my lod so i am forced to go this route. anyone know where i could get a cheap decent one?

^ OH nice!

Nice setup, and very nice picture. You can get an LOD (and Interconnect if you need one) for a pretty good price from the iBasso website.

^ Beautiful set up & artistic pic is class.

Oh and In Rainbows is also 'Art' man I love that album

EFN has a nice LOD up for sale: http://www.head-fi.org/forums/f44/fs...teflon-413531/

got my iHP120, so been playing around with analogue line-out until I finish my gamma1 and get my D10

iHP120 with pico and SE530



iHP120 with Lisa III and W3 missing my UM56 badly sending them off for a refit AGAIN. the first time was to try and adjust them; this time I got new impressions




and last but not least my transportable rig

Nice.

Ottoyu, are the ACS customs molded to the HP or are they removable?

They are removable but as they are molded to the shape of the HP body they are not really suitable for other phones. You could probably use them but they wouldn't sit properly in the mold.

I used to use my q-jays in my SE530 custom molds.

thanks for the comments. I will look into those LODs. EFN's looks really nice. might have to go for that one.

Simple, yes. But it looks nice, and I am sure it makes you happy!