Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Special iPod LOD for FiiO? Need help!
New Posts  All Forums:Forum Nav:

Special iPod LOD for FiiO? Need help!

post #1 of 4
7/28/08 at 9:31pm
Thread Starter 
Head-fi, I need your help!

I just ordered the FiiO, and there is no volume control on that little creature!
So I was thinking, when my iPod 6G is connected to the dock, and that dock is
connected via a custom made iPod LOD > RCA to my amp, I can turn the volume down with my Apple Universal Remote.

At that point, what piece of equipment is turning down the volume?
I see the volume bar on my iPod decreasing as the sound is being turned down.

We use pin 2, 3 and 4 for line-out, but add a 1kOhm to pin 21, so the iPod "thinks" it's docked, and thus gaining the ability to control volume via LOD, correct?

Can anyone confirm this?
I can't, since Qables.com in holiday 'till August 10th, so I can't get any supplies.
Reply
post #2 of 4
7/28/08 at 10:36pm
There must be an amp in the dock, then. True line out has no volume control. AFAIK...
Reply
post #3 of 4
7/28/08 at 10:40pm
you might just be attenuating a line out signal with the remote. not amplifying, but lowering the volume of the line signal. Maybe one of these

and a line level attenuator in between the amp and the line out
would work
Reply
post #4 of 4
7/29/08 at 7:30am
Thread Starter 
Yeah, that works, but that only makes the rig bigger.
I want to use as little as necessary.

Anyway, I also read the iPod classic and the iPhone have compsite audio on pin 27(right) and 28(left). Maybe there is volume control on those?
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Special iPod LOD for FiiO? Need help!