Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Differences between Markl D2000 and Markl D5000
New Posts  All Forums:Forum Nav:

Differences between Markl D2000 and Markl D5000 - Page 3

post #31 of 45
5/15/08 at 12:31am

Regardless...

Regardless... metal, or plastic... it doesn't seem to harm their sound, which just keeps improving with more and more use.

They now sound great with my DV332... after hours and hours of burn in.

While they do sound better with the SS/Tube hybrid X-CANv8... they still sound great with the DV332. The bass keeps tightening, and the mids and highs keep clearing as they have more and more hours on them.
Reply
post #32 of 45
5/15/08 at 12:47am
Hello Markl!
There's only one solution to this debate: take d5000 drivers, put them in d2000 enclosure then a\b with another pair of stock d2000. To perform that, you need to have 2 pairs of d2000 and a pair of d5000.
Or the same thing can be done with 2 pairs of d5000 and a pair of d2000(put d2000 drivers in d5000 and compare with stock d5000)...
Reply
post #33 of 45
5/15/08 at 3:32am
I'd like to see markl modded & recabled comparison of D5000 and D2000.
Reply
post #34 of 45
5/15/08 at 10:15am
Quote:
There's only one solution to this debate: take d5000 drivers, put them in d2000 enclosure then a\b with another pair of stock d2000. To perform that, you need to have 2 pairs of d2000 and a pair of d5000.
Unfortunately, this can't be done. The D2000 earcup is not just the D5000 ear cup made plastic. The screw holes are recessed on the D2000 and the rear of the plastic ring has little posts/extensions to allow the assembly to fit down into the lower screw holes. In other words, you can't put the D2000 ear cups on a D5000 or vice versa.
Reply
post #35 of 45
5/15/08 at 10:25am
That's unfortunate.
Reply
post #36 of 45
5/27/08 at 7:09pm
Hi folks;

I have one of the 1st pairs of D5000s Markl modded for the 2nd mod thread. My housings seem to be plastic, but they sound wonderful.

Bazile
Reply
post #37 of 45
5/27/08 at 9:02pm
Quote:
Originally Posted by antonyfirst View Post
The best explanation I have is the following:
"It seems "S and friends" have not only components in the 1-3.5 kHz area, but also over there (6 kHz range), that in old recordings were boosted by poor quality microphones."
My ears are sensitive, but it's not that I can't stand normal 6kHz frequencies.
Tony, it seems your conclusion about sibilance residing at higher frequencies is correct; atleast according to this definition.

SIBILANCE
--------------------------------------------------------------------------------

The presence of strongly emphasized s, sh, ch, z, j sounds in speech called sibilants. These CONSONANTs are created by air moving through the vocal tract and being constricted by the position of the tongue and lips.

The SPECTRUM of sibilants is that of NARROW BAND NOISE in the high frequency range (5-10 kHz) and therefore their perception is the first to be affected by hearing loss with age (PRESBYCUSIS). Sibilants may be unvoiced (i.e. without pitch) or voiced (i.e. with an added vibration of the vocal cords).
Reply
post #38 of 45
5/27/08 at 10:39pm
Listening to the MarkL officially modified D5000 and my own modding of the D2000 (same steps) - they are quite similar in sound and I possibly couldn't tell a difference with a gun put to my head. I know that I enjoy what I hear VERY much with both of them. Probably the best I have ever heard Bjork!

The dampening on the ear cups really takes the material out of the equation. The dampening on the rest of the parts also helps reduce all those nasty vibrations on the head.
Reply
post #39 of 45
5/30/08 at 1:25am
Quote:
Originally Posted by QQQ View Post
Hello Markl!
There's only one solution to this debate: take d5000 drivers, put them in d2000 enclosure then a\b with another pair of stock d2000. To perform that, you need to have 2 pairs of d2000 and a pair of d5000.
Or the same thing can be done with 2 pairs of d5000 and a pair of d2000(put d2000 drivers in d5000 and compare with stock d5000)...
Quote:
Originally Posted by markl View Post
Unfortunately, this can't be done. The D2000 earcup is not just the D5000 ear cup made plastic. The screw holes are recessed on the D2000 and the rear of the plastic ring has little posts/extensions to allow the assembly to fit down into the lower screw holes. In other words, you can't put the D2000 ear cups on a D5000 or vice versa.
Mark, you seem to be suggesting switching cups, which apparently won't work. QQQ is suggesting actually swapping the drivers themselves. is there a reason why that approach wouldn't work?
Reply
post #40 of 45
5/30/08 at 2:41am
The drivers are mounted onto a sort of plate, which has posts on it, where the cups attach. Short of destroying that, there's no other way.
Reply
post #41 of 45
6/26/08 at 1:50pm
Quote:
Originally Posted by M3NTAL View Post
Listening to the MarkL officially modified D5000 and my own modding of the D2000 (same steps) - they are quite similar in sound and I possibly couldn't tell a difference with a gun put to my head.
M3NTAL,
Does your modded D2000 have the stock cable?
Reply
post #42 of 45
11/6/08 at 8:54pm
So now it is official i guess that the d2000 and the d5000 use the same drivers
Reply
post #43 of 45
3/27/09 at 4:59pm
You are right (the guy after me), this one is inadequate here. Sorry, deleted.
Reply
post #44 of 45
3/27/09 at 5:41pm
I know you're excited with your newly modified D2000 polarwarrior, but stop bumping these threads from the graveyard.
Reply
post #45 of 45
3/27/09 at 5:47pm
deleted
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Differences between Markl D2000 and Markl D5000