[FYI] Various IEM's tips pictorial comparison (updated Sept 29th, 2011) - Page 13

thanks. i may try once more. that's the 1st time i try trimming

so , no bi-flanges suggestion?

i just checked the meelec site and the eartips section was updated. they sell now tips for a151, and it mention they're for a151 and m6. do you think it can match the pl50?

the price is $5 for 3 pairs + $7 shipping , is it worth?

mmm they are the same of the m6. havent you tried them?

and today i tried MY trimmed to bi-flanges and summing up,  noticiable worse isolation than the clone sony hybrids, though a slight more comfort and better fit, vut not worthy. i might keep them for the comming B2...

but if you did tried the m6 bi-flanges, how do you compare them with the sony hybrid (clones), in isolation , comfort , fit , etc?

Quote:

Originally Posted by ClieOS 

My M6 is the older version and doesn't come with bi-flanges.

 

[EDIT] If the bi-flanges is the same one as A151, then I do have that one and it will fit PL50. I prefer Sony Hybrid on PL50 because it has an easier, more comfortable fit. the MEElec bi-flanges. But MEElec bi-flanges offer a little better isolation.

 

yes, at least so it says in meelec site

the thing with the sonys (mid size) is that i have to put them have the way of the pl50 nozzle  to get a good isolation (which make it a little loose and prone to fall  easily), otherwise , the housing stops them to get deep. although, i get a similar fit with the large sonys , when put to the end of the nozzle

but i think i'll try the meelec bi-flanges. if they dont work for the pl50 , then can try them on the B2.

too bad none of the stock pl50 foams worked for me

thank you very much as always

I just got monster turbine and the supertip nor the factory tips fit me too well.

for the super tip the white (between small and medium) foam one fits me the best. the large tri flange from factory fits but it's a little too deep.

So I'm wondering where I can get good bi flange. Reading this thread I saw that

http://www.meelec.com/product_p/tipset3-bf50m-mrg-bk.htm

are pretty good but I'm not sure if those fit

and what's the different between that and this http://www.meelec.com/MEElectronics_Original_Eartips_for_M11_Earphones_p/tipset2-balancedsound.htm

There are so many selections at meelec, any recommendation?

thanks alot for this helpful thread

http://www.meelec.com/MEElectronics_Original_Eartips_for_M11_Earphones_p/tipset5-m11cl-mee.htm

will all those fit the turbines? It looks like a better deal, and I really want to try out their tri flange as well, are those basically like the factory tips from monster? or better

would these fit as well?

http://www.meelec.com/MEElectronics_Original_Eartips_for_M11_Earphones_p/tipset10-m11+cl-mee.htm

The M6 large triflanges are as tall as the Monster's with a larger bore, also softer to boot. 

are you adding the ety's "mushrooms" ?

There are some unmenntioned small olives available from Sennheiser, included with IE series. Better than other olives for the deep fit for my ears - as long as they stay on the IEMs.

Material seems similar to small Shure's (slightly harder), but the nozzle end is wider, they're slightly shorter, far slimmer and end flat instead of tapered ball.

I can't find them available separately and don't know the part number for direct order. I'd like to have some spares just in case. Any help?

Edit: never mind, found the right thread: http://www.head-fi.org/forum/thread/408541/how-to-buy-senn-ie8-replacement-tips

However, a pic of those would be useful, they're quite different. Biflanges too are different, not tapered.