Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Premier Sponsor Forums › ALO Audio Premier Sponsor Forum › iMod Vcap dock & PORTABLE Vcap Dock - Info and Talk Soup
New Posts  All Forums:Forum Nav:

iMod Vcap dock & PORTABLE Vcap Dock - Info and Talk Soup - Page 3

post #31 of 327
There is NO DOUBT you should not use the VCap dock with anything other than a 5.5g iMod. First, only a 5th gen iPod will fit, so no 4G ipod need apply. But more critically, there are huge caps in the signal path! These are needed for the 5.5G iMod, but would totally mess up the sound for anything else. If you really wanted to use this dock just for the looks (and it is beautiful, no doubt), you'd need to see if Ken would custom make you one without the VCaps themselves.
post #32 of 327
x3 or is it 4 on the hammond enclosure. Although getting wood would be great and does look so gooood, the metal dock would be more durable and probably would cost less. I have been mulling over the Imod for some time and the V Dock was the news that I was looking forward to...so far the quality of the sound is getting an excellent review from skylab. The Woody tho really does get the total price up there...although I have been looking at used $1200 and under CDPs...
post #33 of 327
So nothing but the Imod works on the Vcap dock ... ?
post #34 of 327
Quote:
Originally Posted by epaludo View Post
So nothing but the Imod works on the Vcap dock ... ?
Correct.
post #35 of 327
Why am i not surprised ... ?
post #36 of 327
You shouldn't be, since that is what the VCap dock was designed for
post #37 of 327
skylab,
What skin/case are you using that gives you that wood finish?

Is that an Invisableshield?
post #38 of 327
All,

-- The Vcap Dock was only designed for the 5G/5.5G iMods. Sure, you can use a stock 5G/5.5G iPod, but you will not get any benefit from it.

-- 4G iMods are a definite NO because the line-out of the modded 4G units exits from the 1/8" stereo jack on the top (formerally the headphone output) and the line-out from the dock connector is disabled.

-- Ken mentioned to me that he is working on a metal v-cap dock which will be more suitable for portable use (smaller) and less expensive.

I'm sure Ken will add more info to this thread when he gets a chance.

Best regards,

Vinnie

PS: My V-cap Dock has been accumulating the hours of burn-in and sounds even better! It really takes the sound quality of the 5G/5.5G iMod to the max. I know Ryan Clarin of 6moons.com is reviewing one and that review will be out later this month. I hope he puts it up against a much more expensive dedicated CD player because I know the iMod + Vcap Dock will hold its own just fine
post #39 of 327
Quote:
Originally Posted by KB View Post
I built the device with a on off switch for critical listening...
OOPS. I knew that, and then forgot. Your method is perfectly sound [notice the pun...perfect sound... ]
post #40 of 327
Quote:
Originally Posted by immtbiker View Post
skylab,
What skin/case are you using that gives you that wood finish?

Is that an Invisableshield?
It's a skin from Decal Girl (www.decalgirl.com).
post #41 of 327
Quote:
Originally Posted by KB View Post
Mrarroyo,

Thats a great idea! Let me investigate and get back to you.

Ken
Ken, I hope this works. BTW you may want to test submerging the VCAPS in some kind of a resin/glue that solidifies and dampens the caps while inside a transportable enclosure. Thanks.
post #42 of 327
Quote:
Originally Posted by Vinnie R. View Post
I hope he puts it up against a much more expensive dedicated CD player because I know the iMod + Vcap Dock will hold its own just fine
It appears that you are going to get a lot of people worked up in the forums when this review comes out.
post #43 of 327
It's really tough to drop $550 for v-dock. It would be great if less expensive casing could be used instead of wood.
post #44 of 327
Thread Starter 
Quote:
Originally Posted by dan_can View Post
It's really tough to drop $550 for v-dock. It would be great if less expensive casing could be used instead of wood.
Ten four on that... hang in there I am working on this.

Ken
Audio Line Out ALO Forum ---> http://www.head-fi.org/forum/list/70 www.ALOaudio.com Physical Location -32 Ohm Audio http://www.32ohmaudio.com
Reply
post #45 of 327
Quote:
Originally Posted by KB View Post
Ten four on that... hang in there I am working on this.

Ken
Very exciting for me too. Thanks Ken. V-Caps for the People!*









*(with iMods, without $550!)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: ALO Audio Premier Sponsor Forum
Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Premier Sponsor Forums › ALO Audio Premier Sponsor Forum › iMod Vcap dock & PORTABLE Vcap Dock - Info and Talk Soup