Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › THE DIY HEADPHONE STAND THREAD
New Posts  All Forums:Forum Nav:

THE DIY HEADPHONE STAND THREAD - Page 173

post #2581 of 2926
I'm curious to know. Which Lumia phone were you using to take the photos with?
post #2582 of 2926

Hi there,

 

I came here for help, and found info about the Rubbermaid 5E12 hook. I went out to my local Home Depot to find them, alas, no luck.

 

What I did find though was this, a similar device made by Crawford (Model CMHH, also a hose hanger.) which retails for CA8.99 at HD.

 

Although the footprint seems to be a little bigger, the entire thing is powder-coated and rubber-dipped from the back bottom all the way up to what would be the top front. My headphones, (CSB Tactic3D Rage, pls don't judge them, I come in peace) when closed, hang with about 2" below to spare. So i share this info to say thanks. hope it helps someone else.

 

I think because my account is new I can't post pics, but here's a link to the item on the Crawford site.

 

http://74.205.54.31/categoryresults/smart-systems/98

 

Cheers

 

G

post #2583 of 2926

Also seem to be under the Blue Hawk brand at Lowe's.

 

http://www.lowes.com/pd_220190-46880-CMHH-6BK_0__?productId=3455004

 

G

post #2584 of 2926

It's 2:30 am here in England, and I just had an outlandish idea for a headphone stand.

 

One that's going to be made using only cellophane tape.

 

I'll get back to you guys later.. I'll need sleep to ensure that the shops are open when I walk out.... and a lot of tape...

 

*subscribed*

post #2585 of 2926
Quote:
Originally Posted by JacobLee89 View Post
 

It's 2:30 am here in England, and I just had an outlandish idea for a headphone stand.

 

One that's going to be made using only cellophane tape.

 

I'll get back to you guys later.. I'll need sleep to ensure that the shops are open when I walk out.... and a lot of tape...

 

*subscribed*

Ah that's the worst experience.... Having an idea for a design and then trying to sleep, happens to me way too often with projects that sometimes never even get started.

post #2586 of 2926

The cellophane headphone stand Mk 1.0 is complete!

 

http://tibblewinkles.tumblr.com/post/73099464280/cellophane-tape-headphone-stand-the-first-layer

 

I think adding more tape to the base may improve stability..

post #2587 of 2926

Used a rack drum hanger inserted into a spare cymbal stand for my stand:

 

 

post #2588 of 2926
Quote:
Originally Posted by sperho View Post
 

Used a rack drum hanger inserted into a spare cymbal stand for my stand:


 

Warning: Spoiler! (Click to show)

 

Looks as sturdy/heavy as the HE500s do.  Fits them nicely.

 

Is that some DIY funky wiring too?

post #2589 of 2926

Thanks.  Free (for me), too!  On the wiring, it's custom (I made it).  The funkiness near the splitter is due to me just putting some loose sleeves over the leads that go to the cans temporarily to prevent microphonics when they touch each other.  I'll remove the SMC connectors and slip on some narrow diameter sleeves when I get around to it to make it look a little neater.  The amp connection end is 4 banana plugs.


Edited by sperho - 1/12/14 at 1:47pm
post #2590 of 2926

My first DIY.:biggrin:

 

 

 

 

 

 

post #2591 of 2926
Quote:
Originally Posted by semaj8james View Post

I'm curious to know. Which Lumia phone were you using to take the photos with?



Nokia Lumia 1020

post #2592 of 2926
That's what I figured. Welcome to the club smily_headphones1.gif
post #2593 of 2926

 

I hope this time... my design was not magically used by someone else xD 

post #2594 of 2926
Quote:
Originally Posted by BillsonChang007 View Post
 

 

Warning: Spoiler! (Click to show)

 

 

I hope this time... my design was not magically used by someone else xD 

But.... did you design that Glass and manufacture it?  I can take a picture of my headphones sitting on random stuff everywhere too.  That could be thread of endless pictures in itself.

post #2595 of 2926
Quote:
Originally Posted by linglingjr View Post

But.... did you design that Glass and manufacture it?  I can take a picture of my headphones sitting on random stuff everywhere too.  That could be thread of endless pictures in itself.
Not really but it's something like what I am trying to do redface.gif can only find woodies manufacturer rather hard to find...
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › THE DIY HEADPHONE STAND THREAD