New Posts  All Forums:Forum Nav:

A Couple Questions About Vinyl Maintence.

post #1 of 16
6/5/07 at 12:16pm
Thread Starter 
I've been listening to vinyl for about a week now, and am loving every minute of it.


My only concerns are cleaning my stylus, and the amount of static that I feel when I take a record off of the platter.

I clean my records often, so I don't think that is the problem, and my ground seems to be fastened correctly so I think that it out of the question.

Thanks Vinyl Junkies,
Matt
Reply
post #2 of 16
6/6/07 at 10:23am
Two suggestions:

1. Get a Onzow Zerodust to clean the stylus.

2. Get a Milty Zerostat to eliminate static build up.
Reply
post #3 of 16
6/6/07 at 12:13pm
Thread Starter 
Quote:
Originally Posted by Skylab View Post
Two suggestions:

1. Get a Onzow Zerodust to clean the stylus.

2. Get a Milty Zerostat to eliminate static build up.

that is exactly what i was looking for, thanks skylab
Reply
post #4 of 16
6/6/07 at 12:22pm
Mr Clean magic eraser cut into a small piece used very very
gently will do wonders to clean the stylus. x2 on Zero stat should
help with static.
Reply
post #5 of 16
6/6/07 at 4:16pm
Thread Starter 
both of those items are pretty expensive (after looking at them in TTVJ's website), is there a more frugal way to go about cleaning my stylus and getting rid of the static?
Reply
post #6 of 16
6/6/07 at 5:09pm
You can *carefully* try the magic eraser bit on your stylus, but I know of no other way to zap static.
Reply
post #7 of 16
6/7/07 at 1:03am
While we're on the Zerostat subject, could someone maybe tell me something? I just got one.

1. I don't really feel any charge of any kind when I depress the trigger. I was told it was strong enough that it would fry a hard drive if you pointed it at one. Is my Zerostat working properly? I'd say probably yes since I put the little charge indicator on the end and it makes it glow as it says it should.
2. Can you zap your records while they're actually on your 'table, or do you risk damaging your cartridge by doing it too close to it?

Thanks in advance for any help!
Reply
post #8 of 16
6/7/07 at 10:07am
Quote:
Originally Posted by s m @ View Post
While we're on the Zerostat subject, could someone maybe tell me something? I just got one.

1. I don't really feel any charge of any kind when I depress the trigger. I was told it was strong enough that it would fry a hard drive if you pointed it at one. Is my Zerostat working properly? I'd say probably yes since I put the little charge indicator on the end and it makes it glow as it says it should.
2. Can you zap your records while they're actually on your 'table, or do you risk damaging your cartridge by doing it too close to it?

Thanks in advance for any help!
It usually makes a click or 2 when you squeeze the trigger, but it might not. I zap records while on the turntable all the time, it's no problem, but do have the volume down on the preamp.
Reply
post #9 of 16
6/7/07 at 7:43pm
How about something like: http://www.globalsources.com/gsol/I/...8815325124.htm
Reply
post #10 of 16
6/8/07 at 8:59am
If the tip is anywhere within 1/8" of your body, you will get a very big jolt from it. Much worse than the typical static electricity discharge.

Try it and see. It won't harm you, but you will definitely know if it's working!
Reply
post #11 of 16
6/8/07 at 7:48pm
The Milty Zerostat comes with a tip that sparks (IIRC) when you attach it and pull the trigger fully. It is not meant to be used always, but just as a test to make sure functional.

That said, static builds up and certainly pops when you flip the record sometimes. Doesn't bug me that much, but it can be minimized.
Reply
post #12 of 16
6/9/07 at 10:41pm
Thanks much for the responses guys. I guess I'll try zapping myself at some point, but since the tester tip thing works I think I'm OK.
Reply
post #13 of 16
6/18/07 at 3:22pm
Quote:
1. I don't really feel any charge of any kind when I depress the trigger.
I've gone through several anti-static guns over the years and find they conk out fairly easily. Remember to sqeeze and release the trigger slowly.
Reply
post #14 of 16
6/26/07 at 6:14pm
I've heard having some big houseplants near your vinyl set-up greatly reduced static...any truth to this?

Also, I noticed while cleaning records that if I'm barefoot, there's much less static on the records, as opposed to the one time I wore a particularly staticky pair of shoes and was incapable of keeping my cat's hair from sticking to each and every record(!).

Random thoughts...
Reply
post #15 of 16
6/26/07 at 6:28pm
Houseplants raise the humidity, which helps dissipate static. Being barefoot makes you a better conductor, so if you use a carbon-bristle brush the static will drain through you to the floor. When I lived in Colorado static was a big problem due to dry air.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: TTVJ Premier Sponsor Forum