Up for sale is the Millett Hybrid Amplifier, complete with the Diamond Buffers and a Modified Linkwitz Crossfeed. All electrolytic positions are filled with Elna Cerafine 470uF Boutique capacitors, and all film cap positions are filled with .1uF Wima Film Caps. All resistors are Vishay-Dale RN60 resistors, and the volume potentiometer is the famous Alps 'Blue Velvet' pot. The LEDs underneath the tube sockets are red, as well as the front panel LED, blending nicely with the glow of tubey goodness 
. The crossfeed is the Tangent-made PCB, with the enable and level switches on the front panel.
The Power Supply is the STEPS model, with full capacitance. The power indicator LED is also red, matching the amp unit.
The Diamond buffer was made using MJE243/MJE253 transistors.
I will be including a pair of 12AE6A tubes, as well as a pair of 12FK6, which will get you started tube rolling!
The output jack is the locking Neutrik model, as well as the input. This means that I will also include a 1/4" to RCA cable, as this is not the standard for inputs.
With the crossfeed in the case, it does get a little tight. I usually run the Millett topless
as to not have to worry about heat issues, but the included top cover does have tube rings if you so desire to run with the cover on.
The only issue with this amp is that two of the screws on the back panel don't screw in tight, but this does not affect the usability of the amp at all, it just means that you wouldn't want to use it as a portable
Asking price is $275 shipped, Paypal preferred.
. The crossfeed is the Tangent-made PCB, with the enable and level switches on the front panel.The Power Supply is the STEPS model, with full capacitance. The power indicator LED is also red, matching the amp unit.
The Diamond buffer was made using MJE243/MJE253 transistors.
I will be including a pair of 12AE6A tubes, as well as a pair of 12FK6, which will get you started tube rolling!
The output jack is the locking Neutrik model, as well as the input. This means that I will also include a 1/4" to RCA cable, as this is not the standard for inputs.
With the crossfeed in the case, it does get a little tight. I usually run the Millett topless
as to not have to worry about heat issues, but the included top cover does have tube rings if you so desire to run with the cover on.The only issue with this amp is that two of the screws on the back panel don't screw in tight, but this does not affect the usability of the amp at all, it just means that you wouldn't want to use it as a portable
Asking price is $275 shipped, Paypal preferred.
