Head-Fi.org › Forums › Equipment Forums › Computer Audio › ASIO4All Explanation
New Posts  All Forums:Forum Nav:

ASIO4All Explanation - Page 11

post #151 of 476
4/4/07 at 3:00pm
Thread Starter 
Quote:
Originally Posted by scompton View Post
I got no sound out of the eb01 until I disabled the onboard sound and a reboot. Since then it's worked fine.
That's pretty much what it says in the main thread.....
Reply
post #152 of 476
4/4/07 at 3:27pm
Quote:
Originally Posted by EnOYiN View Post
That's pretty much what it says in the main thread.....
Yeah, I know I read it someplace. I wouldn't have known to do it otherwise.
Reply
post #153 of 476
4/4/07 at 6:49pm
Hey Enoyin,

I seem to have fixed the problem. In Sound and Audio devices, under Audio, my sound playback default device was not set to USB speakers. Thanks for reminding me to take a look at this again.
Reply
post #154 of 476
4/5/07 at 4:38am
Thread Starter 
Quote:
Originally Posted by penger View Post
Hey Enoyin,

I seem to have fixed the problem. In Sound and Audio devices, under Audio, my sound playback default device was not set to USB speakers. Thanks for reminding me to take a look at this again.
It's just that Windows has 10 sliders to do the exact same thing. It's pretty annoying some times. It gives you a good idea why people in studios always use MAC instead of Windows.

Glad I could be of some help.
Reply
post #155 of 476
4/14/07 at 5:21am
Dank u wel EnoYiN

This came in very handy
Reply
post #156 of 476
5/11/07 at 12:12am
I consider myself technically competent, but I simply cannot get this to work. SO frustrating.

I downloaded the latest version of Foobar (0.9.4.3) and downloaded the ASIO link here as directed, and all Foobar says is that there's a problem loading the ASIO driver (actually, it says "An error occurred while querying ASIO drivers", and to stop ASIO playback and shut down any other software using ASIO) even when I'm on a fresh restart with nothing else open. When I tried to downgrade to 0.9.4.2, Foobar says the ASIO driver is designed for a newer version of Foobar.

The old version of Foobar I had (before I uninstalled and reinstalled the newest version to try to configure ASIO) was a buggy mess as well.

Has anyone managed to configure ASIO in 0.9.4.3? I'd love to get this set up with ASIO so I could set my PC with Itunes as the front end and Foobar as the back, but I'll be damned if I can get Foobar to do anything I want without throwing errors all over the place.

ANY assistance someone could offer would be greatly appreciated!
Reply
post #157 of 476
5/11/07 at 4:51am
Thread Starter 
I am still running 0.9.4.2 but I am willing to try the newer version later on today. After I have tried that I will post here again and you will see if I got it to work.
Reply
post #158 of 476
5/11/07 at 5:45am
"The latency should be on 2048."
This should be ASIO Buffer Size
Reply
post #159 of 476
5/11/07 at 8:28am
Thread Starter 
Quote:
Originally Posted by tomjonesrocks View Post
Has anyone managed to configure ASIO in 0.9.4.3? I'd love to get this set up with ASIO so I could set my PC with Itunes as the front end and Foobar as the back, but I'll be damned if I can get Foobar to do anything I want without throwing errors all over the place.
I got it working without anything going wrong. So, I'll just give you my version off the ASIO plug-in and then it should work fine.

My version is 1.2.4. The version of foobar is 0.9.4.3.

I am using the same plug-in as I was using for 0.9.4.2. It's the plug-in I linked to in the first post of this thread. I hope this helps.

BTW. What are you using aside from the default Foobar? Some kind of panelUI or ColumnsUI? I have no errors whatsoever in foobar so I think that would have something to do with other plug-ins you might be using.

Quote:
Originally Posted by decayed.cell View Post
"The latency should be on 2048."
This should be ASIO Buffer Size
ORLY?
Reply
post #160 of 476
5/11/07 at 11:40am
Quote:
Originally Posted by EnOYiN View Post
I got it working without anything going wrong. So, I'll just give you my version off the ASIO plug-in and then it should work fine.

My version is 1.2.4. The version of foobar is 0.9.4.3.

I am using the same plug-in as I was using for 0.9.4.2. It's the plug-in I linked to in the first post of this thread. I hope this helps.

BTW. What are you using aside from the default Foobar? Some kind of panelUI or ColumnsUI? I have no errors whatsoever in foobar so I think that would have something to do with other plug-ins you might be using.
The problem must have something to do with my setup then. That is the ASIO plugin version I am using.

Actually, I removed and reinstalled Foobar for this, so it's clean with no other plugins at all. I'm using ASIO4ALL v2. The plugin and setup for Winamp works fine. Unfortuantely, no matter what I try I get that same "An error occurred while querying ASIO drivers" error over and over in Foobar.
Reply
post #161 of 476
5/11/07 at 2:09pm
Thread Starter 
Quote:
Originally Posted by tomjonesrocks View Post
The problem must have something to do with my setup then. That is the ASIO plugin version I am using.

Actually, I removed and reinstalled Foobar for this, so it's clean with no other plugins at all. I'm using ASIO4ALL v2. The plugin and setup for Winamp works fine. Unfortuantely, no matter what I try I get that same "An error occurred while querying ASIO drivers" error over and over in Foobar.
Errr... I am sorry, but in that case I don't have a clue about what's going on then. You can still try asking at Hydrogen Audio.

It did work when using 0.9.4.2 I assume? So, if you wouldn't mind too much I think I would install the older version. (it's a poor alternative - I know)
Reply
post #162 of 476
5/11/07 at 4:09pm
Quote:
Originally Posted by EnOYiN View Post
It did work when using 0.9.4.2 I assume? So, if you wouldn't mind too much I think I would install the older version. (it's a poor alternative - I know)
No, it didn't work in 0.9.4.2 either--in fact the component said it was written for a newer version and incompatible or something.

I can't get this to work in *any* version of Foobar. It was painless in Winamp though.
Reply
post #163 of 476
5/11/07 at 4:52pm
Thread Starter 
Quote:
Originally Posted by tomjonesrocks View Post
No, it didn't work in 0.9.4.2 either--in fact the component said it was written for a newer version and incompatible or something.

I can't get this to work in *any* version of Foobar. It was painless in Winamp though.
Did you also try the other link in the first post? This one. In that post is a link to another ASIO plug-in.

If that doesn't work I'm out of ideas and your only option would be to ask someone at HA.
Reply
post #164 of 476
5/11/07 at 6:45pm
I have a strange problem when using ASIO and Winamp. I have everything setup according to the guide (using the out_asio.dll plug-in from the Japanese site), and things are working great except certain songs refuse to play in Winamp.

There doesn't seem to be any rhyme or reason as it can happen on certain songs from an album but not others from same album. These are various mp3s, mostly ripped at VBR. Re-ripping doesn't seem to fix the problem. Winamp doesn't crash, it just stays stuck at 0:00. I can switch to other songs just fine when I hit one of these non-playing tracks.

Does anybody have any insight on this? I can't stick with ASIO as some of my favorite songs just won't play under it.
Reply
post #165 of 476
5/12/07 at 6:00pm
Thread Starter 
Quote:
Originally Posted by karma View Post
I have a strange problem when using ASIO and Winamp. I have everything setup according to the guide (using the out_asio.dll plug-in from the Japanese site), and things are working great except certain songs refuse to play in Winamp.

There doesn't seem to be any rhyme or reason as it can happen on certain songs from an album but not others from same album. These are various mp3s, mostly ripped at VBR. Re-ripping doesn't seem to fix the problem. Winamp doesn't crash, it just stays stuck at 0:00. I can switch to other songs just fine when I hit one of these non-playing tracks.

Does anybody have any insight on this? I can't stick with ASIO as some of my favorite songs just won't play under it.
If that happens there are a few options:

1) The device can't handle the latency.

2) The device can not handle the sample rate.

3) There is a bug.

4) You are not using a decent program.

I can't think of anything else than these options. I am assuming that you set the latency right and that most of your CDs are 44.1/ 16 so that leaves option 3 and maybe 4 if you are willing to switch.

You can also try kernel streaming. You can set that up in pretty much the same way as ASIO.

If someone else might have any ideas on this please do tell.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Audio
Head-Fi.org › Forums › Equipment Forums › Computer Audio › ASIO4All Explanation