New Posts  All Forums:Forum Nav:

ja mitchell record clamp + technics 1200 ??

post #1 of 3
3/18/06 at 5:16pm
Thread Starter 
Anybody know if the J.A. Mitchell record clamp http://www.needledoctor.com/s.nl/sc....it.A/id.932/.f
will fit on a technics 1200, bareing in mind that it has a felt mat not the stock rubber thing?
Reply
post #2 of 3
3/27/06 at 3:22am
The Michell clamp uses a collet system, so it should work fine. Basically you put the record on the mat and then slip the clamp on top...twist the nut a 1/4 turn and it grabs a hold of the spindle snug. Two concers would be if the spindle is too long (it really can't be too short). The other concern would be if the spindle is a different diameter, but it should be standard...PM me if you really need to know and I will measure my Michell's spindle and report back to you.
Reply
post #3 of 3
3/27/06 at 3:45am
Thread Starter 
Thanks very much for your input.
I have between 10mm and 12mm of spindle showing, depending on the thickness of the record and the felt mat bieng used.
Is this similar to that on michell TT?
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: TTVJ Premier Sponsor Forum