New Posts  All Forums:Forum Nav:

M3 Initial setup

post #1 of 7
12/30/05 at 4:03pm
Thread Starter 
Hi, I just finished building my m3 and I'm doing the initial setup right now. I'm following amb's excellent website.
It says I should measure R9G+ and by using BIAS(G) I should set it for 80 mV. I understand that, I'm just a little unsure about my meter, because when I measure across R9G+ the highest I can get is 7.9 with my meter set to the 200m scale/setting. Will this do? If I've made som huge blunder, please be gentle This is my first real diy project (besides some cmoy's) and I'm not exactly all that great with electronics.

Thanks
Reply
post #2 of 7
12/30/05 at 4:10pm
You might want to post in this Headwize thread also:

http://headwize.com/ubb/showpage.php?fnum=3&tid=5863
Reply
post #3 of 7
12/30/05 at 4:12pm
Thread Starter 
Well.. , it's a really stupid/simple question so I don't want to clutter any additional threads
Reply
post #4 of 7
12/30/05 at 4:39pm
amb and morsel will be able to help you in that thread specifically.
Reply
post #5 of 7
12/30/05 at 5:24pm
Thread Starter 
Ok I'll post there too as soon as I can get my account activated.
Reply
post #6 of 7
1/8/06 at 3:49am
Thread Starter 
I got a chance to work on the amp some more today, and after 30 mins of poking around and rechecking components it tourned out that I had managed to switch biasop and bias for all 3 channels
Works great now, and I'm already enjoying it a lot.
Reply
post #7 of 7
1/8/06 at 3:50am
Thread Starter 
I got a chance to work on the amp some more today, and after 30 mins of poking around and rechecking components it tourned out that I had managed to switch biasop and bias for all 3 channels
Works great now, and I'm already enjoying it a lot.
Reply
New Posts  All Forums:Forum Nav:
  Return Home