New Posts  All Forums:Forum Nav:

AKG K1000 Replacement Cable

post #1 of 13
12/27/05 at 5:49pm
Thread Starter 
Hi all. I have the above coming shortly and am already thinking about cable upgrades. As a result of some light research, I haven't seen much mention of anything working well aside from the Stefan Audioart model. Am I missing something?

thanx in advance
Reply
post #2 of 13
12/27/05 at 5:52pm
Thread Starter 
Also, as a follow up to my original post...help me understand how linking an "upgrade" cable to the original "bad" cable works to improve sound?
Reply
post #3 of 13
12/27/05 at 6:03pm
An alternative to the stock extension cable includes Larry's Headphile version, which is much more reasonably priced than the SAA version:

http://www.headphile.com/page8.html

Never heard it though. I'd wait until you get the headphones, and try them as stock before looking for a different extension. With your amp & source, you will be very pleasantly surprised.
Reply
post #4 of 13
12/27/05 at 6:26pm
Also Moon Audio can make you a AKG K1000 XLR->1/4" adapter in their Silver, Blue, and Black Dragon models. Ask Drew, he will hook you up!
Reply
post #5 of 13
12/27/05 at 10:38pm
Thread Starter 
Thanx everyone. I will begin researching these alternatives but, will indeed to see if I feel it is even necessary. My philosophy has always been, however, that when spending so much on a system, it's worth spending a little bit more to ensure that you're realizing 100% of your systems potential.

Has anyone experienced the Zu cable??
Reply
post #6 of 13
12/27/05 at 10:57pm
I've been using a cable built by Edwood. It's an xlr to 1/4 and sounds great with my Raptor (haven't been using the K1000 lately). I haven't compared it to any of the other cables out there.
Reply
post #7 of 13
12/28/05 at 12:22am
Srajan Ebaen's recent article on the Stefan AudioArt cable for the AKG K-1000 may be of some interest to you.

http://6moons.com/audioreviews/stefa...rt2/k1000.html

Best,
iDesign
Reply
post #8 of 13
12/28/05 at 7:40pm
Thread Starter 
Has anyhone ever heard of this cable?

http://cgi.ebay.com/OFC-headphone-ex...QQcmdZViewItem
Reply
post #9 of 13
12/28/05 at 11:12pm
Quote:
Originally Posted by pawlowski6132
Also, as a follow up to my original post...help me understand how linking an "upgrade" cable to the original "bad" cable works to improve sound?
I use a very well-made custom cable tail made by headfi member "Orpheus". It attaches to the (hardwired) section of "bad cable" on the K-1000, and I can tell you that it does sound significantly different than the stock cable which it replaced. "Upgrade" cable changes can make a noticeable difference by providing better EMI/RFI noise rejection, and depending the design and materials used, they can work to alter the tonal balance of the sound you hear. These are two ways that changing only 1/2 of the cable can change the entire cable's performance, hopefully to your satisfaction. When you join the two different halves you essentially have a "new" cable. I think my new cable sounds better than the stock one (as well as sounding "different"), but that is a personal judgement call.
Reply
post #10 of 13
12/29/05 at 12:42am
Has anyone tried a speaker cable or interconnect with K1000?
Reply
post #11 of 13
1/10/06 at 5:46am
Quote:
Originally Posted by pawlowski6132
Has anyhone ever heard of this cable?

http://cgi.ebay.com/OFC-headphone-ex...QQcmdZViewItem
I'm using that cable right now, to connect K1000s to DAC1. It was a significant upgrade over the stock extention cable (reterminated with a radio shack 1/4-inch jack). The stock extention sounded quite harsh. I'm quite happy with the eBay cable, it might be the only thing thats keeping me from going insane from not having a better amp to drive K1000s.
Reply
post #12 of 13
1/23/06 at 7:24pm
Quote:
Originally Posted by Patrick82
Has anyone tried a speaker cable or interconnect with K1000?
Yes, I custom made a tail-end cable for my K1000s using Kimber 8TC speaker wire. The 8TC is suitable for bi-wiring speakers, so it has enough separate conductors that you can run all four wires for the K1000 through a single cable.

I'm still running the stock AKG wire on the end attached to the headphones. The Kimber 8TC replaced the extension wire, and noticeably improved the bass response.

Kimber 8TC is expensive, though. I already had a piece of it laying around unused, so I used it up. If I had to fork out the bucks to acquire it, I probably would have went for the hardwired cable upgrade from Stefan AudioArt.
Reply
post #13 of 13
11/23/11 at 3:11am

Hi I m looking for a end part of the cable for my 1000s. I will NOT fiddle with the stock that goes out of the phone. But if one can get better sound just by changing the stock extension Im on it. Thread is a bit old though. Does anyone have tips on links or sellers at the moment?

Reply
New Posts  All Forums:Forum Nav:
  Return Home