Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Problem with Dynalo
New Posts  All Forums:Forum Nav:

Problem with Dynalo - Page 3

post #31 of 35
11/15/09 at 5:53pm
how much current from each rail is the board drawing from the PSU?
Reply
post #32 of 35
11/15/09 at 6:30pm
Unfortunately, I have no access to a scope. I measured the current draw from each channel and it is around 65-70ma per channel.
Reply
post #33 of 35
11/16/09 at 2:16pm
Why don't you just switch the boards, left to right! Since all voltage readings seem OK, It might be the connections after all.
Reply
post #34 of 35
11/16/09 at 2:45pm
The Dynalo boards are stereo; both channels are on the same board.
Reply
post #35 of 35
11/21/09 at 5:58pm
I've stepped away from the faulty Dynalo board for the last few days. Just for fun, hooked it up this morning, and everything works. No idea what was different this time, but certainly no complaints on my end. I've since paired it with another Dynalo to make a Dynamid.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Problem with Dynalo