Head-Fi.org › Forums › Equipment Forums › Cables, Power, Tweaks, Speakers, Accessories (DBT-Free Forum) › Cheap 24 V power supply in and around Germany
New Posts  All Forums:Forum Nav:

Cheap 24 V power supply in and around Germany

post #1 of 9
Thread Starter 
While I was mistaken the last time by my own all too quick measurement, an opportunity for a really cheap 24 V (DC) power supply with linear regulation for amps like the PortaCorda series just had to turn up sooner or later. Well, there it is: Thingy is called APS524, does 230 V (AC) to 12/15/18/20/22/24V and 550 mA - and you can order it for the enormous price of 3.95 Euro over there: http://www.pollin.de/shop/shop.php?c...=ODk1OTc5&ts=0

I've already received a couple of these today - first impression is quite positive, cause it's not too cheaply built. You can even open it up (provided that you have the appropriate security bit a hand) - inside you'll find the usual components, including a more-or-less no name 1000 µF buffer cap and an NS LM317T linear regulator, which is attached to a trustworthily big passive cooler. And there even is a bit of thermal grease to be seen - all for 3.95: I mean like... WOW!

Only problem for the electronics impaired might be that the voltage selector has no markings - so one should better have a voltmeter at hand for the initial set-up. In addition, one might doubt the 550 mA given the size of the transformator - I'd assume it to do 550 mA for 12 V only, and half of that at 24 V (= still plenty enough for most portable headphone amps).

Alas, no further testing on my side yet - 'cause first I now have to go digging for that *$&!*%§ angled plud Jan Meier usually provides with the PortaCorda II...

Greetings from Hannover!

Manfred / lini

P.S.: Standard disclaimer: No, I'm not affiliated with Pollin in any way.

P.P.S.: Standard comforter: Yes, I already did business with 'em twice as a customer - and so far it was free of hassle.

P.P.P.S.: Just btw, they also still have those cheap conventional 115 V<->230 V converters - 100 W for 15.95 Euro (http://www.pollin.de/shop/shop.php?c...=Njk1OTc5&ts=0 - mind you the photo is not correct, though: As stated in the German description, there's only one US outlet on the 100 W unit...), and 500 W for 29.95 (http://www.pollin.de/shop/shop.php?c...=Njk1OTc5&ts=0)
post #2 of 9
Quote:
Originally Posted by lini
I've already received a couple of these today - first impression is quite positive, cause it's not too cheaply built. You can even open it up (provided that you have the appropriate security bit a hand) - inside you'll find the usual components, including a more-or-less no name 1000 µF buffer cap and an NS LM317T linear regulator, which is attached to a trustworthily big passive cooler. And there even is a bit of thermal grease to be seen - all for 3.95: I mean like... WOW!
great hint, lini, thanks! given that lm317 on board it should indeed perform better than the 10 times more expensive mascot 2083 (fixed voltage regulator with poorer ripple rejection). could you find any "protection" diodes near the regulator-chip? the mascot lacks them, which can cause some minor problems with headphone-amps that have higher rail capacitances...
post #3 of 9
Thread Starter 
BE: Alright, because my memory sucks plus I haven't got those security bits at home as well as I wanted to abuse it to check some fans for my ongoing pc case review and in order to answer your question, I took the thingy back into the office today: No other diodes except the usual four for rectification - so in addition to the already mentioned tranny, elcap, regulator and voltage selctor, there are just a handful of resistors, one more elcap and a trim-pot (Piher).

I'm pretty sure it's actually an Ansmann, btw... Somehow the design and naming scheme seems familiar...

Greetings from Hannover!

Manfred / lini
post #4 of 9
Thread Starter 
Well, I'll eat a microwave oven, if it isn't an Ansmann... But I won't have to - looky here: http://oem.ansmann.de/en/s_standard_03.html

Greetings from Hannover!

Manfred / lini
post #5 of 9
i bought one of these, too. really surprisingly well made. i agree with lini, that this one seems to be made by ANSMANN. again: adjustment of the proper voltage needs a voltage-meter/dmm. the adjutment wheel on the backside covers a sort of rotary switch that gives me 5 steps from 13,5-25,8v. nice offer - take it!
post #6 of 9
Thread Starter 
I'm glad you like it, too. Which reminds me, that I wanted to order some more of these...

Greetings from Hannover!

Manfred / lini
post #7 of 9
How do I get ac out of this? I'm only getting dc.
post #8 of 9
Thread Starter 
Quote:
Originally Posted by maarek99
How do I get ac out of this? I'm only getting dc.
Uhm...

Quote:
Originally Posted by lini
(...) an opportunity for a really cheap 24 V (DC) power supply with linear regulation for amps like the PortaCorda series just had to turn up sooner or later. Well, there it is: Thingy is called APS524 (...)
Well, as I said - it's a DC power supply. *cough* Sorry, man...

Greetings from Hannover!

Manfred / lini
post #9 of 9
?
New Posts  All Forums:Forum Nav:
Head-Fi.org › Forums › Equipment Forums › Cables, Power, Tweaks, Speakers, Accessories (DBT-Free Forum) › Cheap 24 V power supply in and around Germany