post #1 of 1
4/8/05 at 4:00pm
Thread Starter 
Hi.

Im selling my Sony R500 Dat Deck in mint condition

approximately 2000 hours, includes manual, remote ( i even have an extra remote)

original owner, never been serviced, never had a problem.

These are amazing decks.

if intersted, please email me at smashmark@aol.com

thanx!


here are the specifics:


Tape Speed:Standard: 8.15 mm/s
Long Play: 4.075 mm/s
Drum Rotation:Standard: 2,000 rpm
Long Play: 1,000 rpm
Error Correction:Double-encoded Reed Solomon Code
Track Pitch:13.6um (20.4um)
Sampling Frequency:48 kHz, 44.1 kHz, 32 kHz
Modulation System:8-10 Modulation
Transfer Rate:2.46 Mbit/sec
Channels:2 Channels Stereo
D/A Conversion:Standard: 16-bit linear
Long Play: 12-bit non-linear
Power Requirements:120V AC, 60Hz (USA/Canada)
230V AC, 50/60Hz (Europe/UK)
Power Consumption:34W
Dimensions:19"x5.75"x14"
Weight:7.2 kg (15 lb 14 oz)
Variable Range of Balanced
Analog I/O Reference Level:+4 dBs to -12 dBs
Max. Balanced Analog Output:+24 dBs
Frequency Response(*):Standard: 20-20,000 Hz (+/-0.5 dB)
Long Play: 20-14,500 Hz (+/-0.5 dB)
Signal-Noise Ratio(*):90 dB or more (20 kHz LPF, A-Weight
Filter On)
Total Harmonic Distortion:Standard: 0.05% or less
Long Play: 0.03% or less
Wow & Flutter:Below measurable Limit
(+/-0.001% W.PEAK)
(*During analog input with SBM off)
Input Connectors:Analog
Unbalanced - RCA jack; Input Impedence 47 kilohms; Rated Input -12dBs
Balanced - XLR-3; Input Imp. 10 kilohms or more; Rated Input +4 dBs
Digital
Coaxial - RCA jack; Input Impedence 75 omhs; Rated Input 0.5 Vp-p
AES/EBU - XLR-3; Input Impedence 110 ohms
Output Connectors:Analog
Unbalanced - RCA; Output Imp. 1 kilohm; Rated Out -12 dBs; Load Imp. 47 kilohms Balanced - XLR-3; Output Imp. 100 ohms; Rated Out +4 dBs; Load Imp. 10 kilohms or more
Digital
Coaxial - RCA; Output Imp. 75 ohms; Rated Out 0.5 Vp-p; Load Imp. 75 ohms
AES/EBU - XLR-3; Output Imp. 35 oms; Load Impedence 110 ohms
Reply