Head-Fi.org › Head Gear › Headphone Amplifiers › Portable Amps › Triad Audio L3 › Reviews › Lillee's Review

Technical Specs of the Lisa III

A Review On: Triad Audio L3

Triad Audio L3

Rated # 17 in Portable Amps
See all 5 reviews
Review Details:
Audio Quality
Design
Quality
Value
Lillee
Posted · Updated · 1499 Views · 2 Comments
LISA III Portable Headphone Amplifier
Technical Specifications
 
Device Type        Solid State (IC Op-Amp/Buffer Discretehybrid)
Class of Operation     DYN-O-BIAS II> Dynamically biased non
Bass Boost parameters    Switching output stage..+3dB@160Hz +12dB@ 32Hz. Maximum
Frequency Response    Frequency Response @ 100 mW Into a 45Ohm Load.D.C.-1.6 MHz. Within +0 to - 3dBD.C.- 600 KHz. Within +0 to - 1 dB...
Signal-to-Noise Ratio    Signal to Noise ratio relative to RatedPower Output. Input Shorted > 100 dB “A” Weighted..
Total Harmonic Distortion    Typical Total Harmonic Distortion (THD) 
                @ rated Output 15 –  30,000Hz
                @15 Hz.___< 0.09%
                @1KHz.___ < 0.04%
                @ 30 KHz.___ < 0.05%
Stereo Crosstalk    >95dB @ 1KHz...
Voltage Gain        13.141dB (Av= 4.54)
Input Impedance        50K ohms /100pF...
Input Sensitivity    200mV to 3.0Vrms...
Output Impedance    Less than 0.3 Ohms DC-20KHz & < than 1ohm @ 200KHz..
Output Voltage        5.0 Volts RMS from DC- 500KHz @ 1,000Ohms...
Minimum Continuous sine wave PowerOutput
Per channel from 20-20,000Hz
With less than 0.1% THD + Noise
 
Internal Batteries    9.6v Load Impedance470 mW_ 14 Ohms270 mW 32 Ohms200 mW_ 45 Ohms
Inputs/Outputs        (2) RCA inputs, (1) ¼” Inch headphone output...
Operating Voltage    20-24 VDC@50mA..
Power Consumption    26 mA Quiescent..

2 Comments:

Are you planning to actually review this amp or just post the technical specifications?!? 
Just the specs, I found it very hard to find! here it is
Head-Fi.org › Head Gear › Headphone Amplifiers › Portable Amps › Triad Audio L3 › Reviews › Lillee's Review