Head-Fi.org › Head Gear › Headphone Amplifiers

Headphone Amplifiers

Manufacturer

904 Results
EMU 0202 USB 2.0 Audio Interface

EMU 0202 USB 2.0 Audio Interface

The E-MU 0202 USB 2.0 Audio Interface is the ultimate portable USB audio interface for PCOffering pristine 24-bit/192kHz recording and playback and direct monitoring, the Emu 0202 is able to give you a host of professional features in a compact, USB bus-powered package.The 0202 USB sets a new standard in portable USB audio, providing users with two Class-A preamps that can be run independently...

Meier Audio Corda 3Move

Meier Audio Corda 3Move

From the energy of two small batteries a portable CD- or MP3-player nowadays feeds us with many hours of music. However, the use of a supply voltage of just 1,5V or 3V has its price. Many headphones require quite a high signal to obtain reasonable sound levels. The low supply voltage simply doesn't provide enough "juice" to drive these headphones properly and sound quality is...

Travagan's Red - Headphone & Power Amplifier

Travagan's Red - Headphone & Power Amplifier

A small form factor headphone amplifier and power amplifier.

Audio-gd Roc

Audio-gd Roc

Real balance HP Amp/Preamp Roc is base on Phoenix design, it is trust balance design ,signal circuits and classis box style same with Phoenix. Roc apply 4 floors ALPS volume pots , and apply class A PSU. Roc has gain balance control between RCA and XLR , so between RCA input and XLR input, have same output level .

Meier Audio Corda Cantate 2

Meier Audio Corda Cantate 2

The CANTATE.2 uses the concept of active balanced headphone ground to minimize to total sum of the potentials of the headphone wires. This concept strongly minimizes the energies stored and released in the electrical fields inside the dielectricum (the insulation) of the wire when an audio-signal is applied. The influence of the wire on the sound is thus reduced. Moreover, with active balanced...

Audiovalve RKV Mark II

Audiovalve RKV Mark II

The RKV is a powerful high-end OTL (output transformer-less) tube-driven headphone amp that uses a unique and patented circuit where an OPAMP biases the tubes. It comes with an optional Impedenzer allowing it to drive low-impedance headphones (below 100 Ohms), the AKG K1000 and speakers.

HeadAmp AE-2 Portable Amp

HeadAmp AE-2 Portable Amp

A portable amp with a 8.4V lithium polymer battery, RCA and 3.5mm inputs, and a 3-way gain switch.

Ray Samuels Emmeline XP-7 Headphone Amp

Ray Samuels Emmeline XP-7 Headphone Amp

Headphone amp. Battery or dedicated power supply powered.

Woo Audio GES

Woo Audio GES

* Technical Specifications: Input impedance: 100 Kilo-Ohms * Frequency response: 10 Hz - 80 KHz, -3dB * Signal/Noise: 100 dB * Bias voltage: 580VDC * THD: <= 0.1% * Voltage: AC 110/220V, 50/60 Hz * External dimension: 6½(H), 13"(W), 10½"(D) * Weight: 22.5 lbs * Standard Featurs: Point-to-Point Wiring * Four 12AX7 [PDF] drive...

Woo Audio WES

Woo Audio WES

* Technical Specifications: Fully balanced topology * * Dual power switch * Standard chassis size * Removalbe glass panel * External dimension: PSU: 4.5”(H), 16.5”(W), 12”(D) AMP: 7.5”(H), 16.5”(W), 12”(D) (with tube gauard) * Weight (AMP + PSU): 40 pounds or 18.2 kg * more to come... * From a cold start,...

Head-Fi.org › Head Gear › Headphone Amplifiers