New Posts  All Forums:

Posts by ccfoodog

You can trim the shroud on the 10vi cable to fit, but don't bother. It does't fit tight enough to overcome the stiff cable and it is likely you'll have connection issues. The 500vi cable is not removable and just included as a comparison. The JH mic cable is the only viable choice at this time IMO. -john
  So I ordered a couple of sets of these cables and have now been using them for a while.  I think these are by far the best alternative for a mic cable for IEMs using this type of connection, but they are not perfect.   I'm using mine with a set of Shure 530s that were re-molded by UE when the OEM cable broke.   The good:   - high quality cable identical in look and feel to the high end Westone and (pre 2010) UE cables - high quality molded IEM side plug (looks same as...
Anyone try: http://www.jhaudio.com/product/mic-cable-smart-phones -john
Yah, that's brilliant on their part. -john
http://www.westonemusicproducts.com/music/index.php/products/epic-mics-cable.html
I've updated the first post to indicate my intent not to update the table any longer.  I think most DACs do work with the iPad at this point, at least if you allow the provision of external power in the definition of "work" (which I do).   Carry on!   -john  
deleted
deleted
deleted
  Well, I finally sat down to replace the ends on my UE "vi" cable to use with my Unique Melody remolded Shure 530s with custom sockets, and... well, hang on a second.   The "vi" cables have a slightly different cable than the standard "custom" cable.  They have a little plastic "shroud" around the pins.   ..grabs for the nippers..   Well, I tried just trimming off the shroud, and works fine for me.  Perhaps the real UE custom earphones have a recess where...
New Posts  All Forums: