I like browsing Head-Fi with my Android with the stock browser, but when I try to post, I just get a "please wait" progress bar dialog box forever. I don't need wholesale changes to the site, I just need to be able to post...
Quote:
Originally Posted by iamthecheese
I was looking at the stations on that site and was wondering is there any difference between normal and lead free soldering stations besides max power consumption and...
Yes, I sometimes use these when soldering a sensitive device to a pcb with large traces or ground plane: http://www.radioshack.com/product/index.jsp?productId=2062233
They are a flat nose copper alligator clip and you can bend...
63/37 Sn/Pb solder melts at about 183C, but I have my iron set at 325C. I would start somewhere between 325 and 350 and as you learn more, make a slight adjustment until you like the results. Sometimes when I am soldering 18Ga - 10Ga...
Re-cabling the D2000 is pretty easy due to the pcb connection; it should take less than 5 seconds of applied heat to make the joint anyway. I re-cabled mine last year, and it took me about an hour. If I had not been very familiar with...
midoo1990:
This information might be too late to help you but here it is anyway. Get a friend to download and burn a Linux live cd onto dvd (confusing huh?...cd is too small to hold it) for you. Then you can boot from the live cd...
