Posts by DolbyR

Thanks Tomb, I was finally able to measure the voltages (my old dmm died, then no time, and so on..) so.. Input to Alien (from Soha 12v points through lm317 reg) - 10.50v 5v test point - 5.42v 3.3v test point - 3.30v so...

Hello. I just finally finished my AlienDAC...well actually I finished all the soldering about a year ago but just yesterday I got to hook it up. When plugging it in to any of my laptops, I first get greeted with the usual message...

Hi, I've been listening through a SOHA amp and RP-21's the past 2 years, however, the RP-21 headband is giving up, and although I enjoy these cans a lot, I think it's time for something different. My listening habits have somehow...

Hi, I'm currently with RP-21's...running through AlienDAC/SOHA combo... The RP21's are starting to show some wear after nearly 2 years (cracked headband) so I'm considering new choices. So..should I change to any of the...

Are there other differences between the two than the display (for rpms?) and the slight change in the shape? If not, then probably its not worth the extra money (dont know the difference actually). Im using a 3956 clone from years and...

Yepp, I get continuity there, also starting from pin 1 and turning the shaft, I get continuity on that "extra" pin on row two and the corresponding other pins. So it looks like the pins are the same order as on that picture...

Mine is 99% like this one The only difference is the placement of the row with more pins, if you look well, the one marked as position 1 has double the pins of the other rows (the same thing in the side where is the other screw)....

thats clear, thanks. So I guess I should just multimeter it somehow to find out which pins/resistor places are for which positions of the switch.

Hi Guys. I've just got from ebay a stepped attenuator "kit" this doesnt come with instruction so I need bit of help. The selector is almost exactly as here http://www.diyfidelity.com.au/produc...products_id=32 so I'm using...

Cant ignore asking...but what is that thing over what you took the pictures of the cmoy? Edit: nevermind, just saw the link to your Pro-Ject Xpression III