New Posts  All Forums:

Posts by xxlMusikfreak

I had exactly the same problem with my 701s. They are nearly two years old and I first looked for a hair in the left driver but there was none. Send them to AKG service in germany and they replaced the driver and threw in some new pads....
If I win the lottery I would buy one of these in a heartbeat: The Wiesmann Roadster MF3. Engine and gearbox from the BMW M3 in a car weighting just above a ton. The whole interior is covered in leather and it has gorgeous...
Man this game is great! Druid - Always at their best
- Look for a Corda Cross-1 on the used market - build yourself one - build yourself an easy Linkwitz X-Feed - find someone that builds you one of these
Quote: Originally Posted by Baines93 The link in the comments to this: Techotic - Crocodile scarring ritual into manhood should be watched. Holy frick! That was intense
It can be the fault of the receiver. Is it still distorted if you switch the receiver on? In my case the switched off receiver adds distortion (the relais are somewhat strange connected then I suppose) while the switched on (regardless...
The 17-40 is one of my main lenses. Optics are very good, even on a fullsize cam, and the ring-USM is really fast and silent. Dust and water sealing is nice too and I was in several situations where this gave me the extra security to...
I'm using a Philips SBC-HD1502U. It has anlog and digital in and can output normal Stereo or Dolby Headphone decoded signals. So you can hear 5.1 from DVDs (DTS and DD ist supported) or virtual 5.1 from stereo sources (Dolby Pro Logic)....
Most PSUs are designed to take a little band of voltages i.e. 110-130V (US and Japan I think) or 220-240V (Europe, Australia etc.). As long as the amp is used within these boundaries there is no problem normally.
I have one with DACT for quite a while now and I'm perfectly happy with it. It's definitely one of the best things I bought in this hobby. Can't say anything bad about it. It's beautiful to look at from outside and inside. It drives...
New Posts  All Forums: