Post pics of your builds....

[robzy]

Which hammond are you using there?

Rob.

[jhawk22]

546-1455N2201, its 8'' long. I had tried the 6'' model but it seemed too cramped. The dynalo gets pretty hot.

[DolbyR]

The Board:

CB inside the enclosure:



and the CMOY...





The big hole on the amp was supposed to be for the pot that in the end couldn't fit in the enclosure.

The enclosure will change soon as the setup will become with 2 9v bats in series, better opamp, pot, different switch and led.


EDIT: Pics moved to http://www.halmetaudio.cjb.net/Cmoy1.html

[retaeht]

Nice work with your CMOY DolbyR.

I suppose the sound is great with your new headphones
Good luck with the next one.

[bg4533]

Originally Posted by jhawk22

546-1455N2201, its 8'' long. I had tried the 6'' model but it seemed too cramped. The dynalo gets pretty hot.

I fit a Dynalo in the 6" model and it was a tight fit. It has a Alps blue pot and a Neutrik Chrome nose jack. I doubt I could have fit the locking jack in. The case does get really warm. I replaced the top panel with a metal grill.

Where did the headphone logo LED come from?

[jhawk22]

Originally Posted by bg4533

I fit a Dynalo in the 6" model and it was a tight fit. It has a Alps blue pot and a Neutrik Chrome nose jack. I doubt I could have fit the locking jack in. The case does get really warm. I replaced the top panel with a metal grill.

Where did the headphone logo LED come from?

I was able to fit the dynalo in the 6'' hammond but with the pot and jack mounted off center.


I made the headphone logo with acrylic and photoshop, its one of a kind.


Here are some pics of the top(tinted) and back.

[rjkdivin]

Very nice looking build jhawk22!!!!! How does it sound?

[jhawk22]

Compared to a ppa with glassman's diamond buffers, it sounds brighter, more impact in bass, the treble seems a little more edgey. Some recordings sound truely horrible, its not very forgiving. I notice sounds not heard on the ppa.

I prefer the warm sound of the ppa with opa627, but the dynalo seems to be growing on me

[Xakepa]

-2x2227PA
-TLE2426+BUF634 on the ground channel
-Gain 3
-Matched resistors
-Socketed input caps (jumpered for no DC offset soundcard)
-In, out, switch, diode

Hope you like it...sorry for the crapy quality (25K)

[hungrych]

Originally Posted by jhawk22

I was able to fit the dynalo in the 6'' hammond but with the pot and jack mounted off center.


I made the headphone logo with acrylic and photoshop, its one of a kind.


Here are some pics of the top(tinted) and back.

-snip-

Beautiful! o.o