Support Head-Fi.org by
starting all of your
Amazon.com shopping by
clicking here.
____________________________________________________________________
Today's Featured Head-Fi Blog: Jude's Blog
____________________________________________________________________
Please help
support Head-Fi by becoming a Contributing Member
CLICK
HERE -- Contributing Members, thank you
for your generous support! --
I got it from http://www.segor.de , part# "001.07.L.SW" (50mm x 160mm x 200mm) for 20 EUR = $26
The case is a little wobbly and not as solid as the Proma cases I usually pick, sufficient for a headamp though. I picked it in the first line for it's ventilated top.
I got it from http://www.segor.de , part# "001.07.L.SW" (50mm x 160mm x 200mm) for 20 EUR = $26
The case is a little wobbly and not as solid as the Proma cases I usually pick, sufficient for a headamp though. I picked it in the first line for it's ventilated top.
Looking at your case, I think it looks similar to the Hammond 1455T220 series (except the Hammond has a one-piece extrusion for the bottom and sides, and a non-ventilated slide-off top cover). Thus the Hammond would be nice and sturdy, and one could replace the top cover with a perforated metal sheet for ventilation... Just an idea for people who are building the M³ and looking for case alternatives.
I cant believe that nobody has commented on your nice work here. The wood housings look great on your PIMETA and DAC.
The seethrough plastic case for your cmoy is very neat looking as well.
__________________ "For a list of all the ways technology has failed to improve the quality of life, please press three."
Moon Audio modded Original CD-2008MK-II / de Almeida Signature Shadow XLR / McAlister Audio Massive Attack / Headphile modded BlackGold recabled AKG K340 OR APureSound V3 recabled Grado RS-1
__________________ "For a list of all the ways technology has failed to improve the quality of life, please press three."
Moon Audio modded Original CD-2008MK-II / de Almeida Signature Shadow XLR / McAlister Audio Massive Attack / Headphile modded BlackGold recabled AKG K340 OR APureSound V3 recabled Grado RS-1
made some dummy loads (33 / 120 / 300 Ohms) for amp breaking in and output voltage measurements. Thought of building a switchable box like tangent but decided to put 2W resistors into jacks since it's cheaper and more flexible this way
I'll need the Y-splitter for A/B-testing my amps
and finally an ioBox
the outer side of the rearpanel is anodized, the inner side is chromated, therefore conductive and acts as a big ground plane.
who said that you cannot use a frontpanel program for rearpanels
That input/output box looks great. I hope to eventually make something similar, but with a stepped attenuator and preamp functionality instead of the crossfeed.
Nice work!
__________________ "For a list of all the ways technology has failed to improve the quality of life, please press three."
Moon Audio modded Original CD-2008MK-II / de Almeida Signature Shadow XLR / McAlister Audio Massive Attack / Headphile modded BlackGold recabled AKG K340 OR APureSound V3 recabled Grado RS-1
.
Linear Mode
