Support Head-Fi.org by
starting all of your
Amazon.com shopping by
clicking here.
____________________________________________________________________
Today's Featured Head-Fi Blog: Jude's Blog
____________________________________________________________________
Please help
support Head-Fi by becoming a Contributing Member
CLICK
HERE -- Contributing Members, thank you
for your generous support! --
Well quite some time ago (before I became sponsor) I indeed used to post some product pics but mostly they got removed. It is not allowed if you are trading(i.e. selling other then your own used equipment), even if you are not named MOT-er.
pm jude or mbriant if you have any questions on the subject.
Rgds Hans Oosterwaal
Thanks for the info. I slipped up and posted those forgetting that I wasent going to post up woodworking pics.
Man this selling thing is alot more trouble thing than its worth.
-greg
__________________
Toshiba SD-9200 -> Fitz Mod SPC ICs-> FM JA Audio 6as7 12ax7 Amp Mazda grey plates-> F5005 & AKG K240 Sextets
Toshiba SD-9200 -> ICs -> [flea watt amp in the works] -> DIY full range horns Feedback
1st Gen Ipod Nano -> KSC75
I had actually ordered a PCB from amb for his epsilon 12 muting circuit but stupidly lost it. Since I was only building the simple single-supply version for my Millett, I decided to go "from scratch" following the schematic on breadboard before building on perfboard. It's ugly but it works. The 330uF capacitor gives a turn-on delay of about 8 seconds. Now I need to case up the Millett with this and a TREAD.
Ok, because I'm on holidays at the moment I decided to build another multi hyrbid. But this time I reduced it size by quite a bit, the board also has a power regulator circuit also.
Can you send the schema and all data on that headphone amp???
I'm going with a Hammond 1455N2201. It's kind of a long case - I haven't decided how I will arrange the components but am leaning towards centering the Millett with the TREAD at the back and the e12 at the front. I'll post a picture when I'm done if it's not too ugly
Here's a pic of my EZDAC that I finished last weekend.
__________________
There are 10 kind of people in the world - those who understand binary and those who don't. ShinyMetal Site| RSS |Forum
d(-_-)b | [:] :)
Linear Mode
