Support Head-Fi.org by
starting all of your
Amazon.com shopping by
clicking here.
____________________________________________________________________
Today's Featured Head-Fi Blog: A Japanese headfier's monologue (Sasaki)
____________________________________________________________________
Please help
support Head-Fi by becoming a Contributing Member
CLICK
HERE -- Contributing Members, thank you
for your generous support! --
Once I was done with the 650 cable I decided to put the stock cable to good use. As some of you remember I also recabled a pair of MDR-V6's. I put that stock plug to use too.
I decided to recable my Koss KSC75's since I wanted a little longer cable then stock and I am addicted. That and had extra stock stuff laying around . Let me know what you guys/girls think.
-Alex-
Are those pretty heavy on your ears now? I imagine they'd tug quite a bit
Niice . It sort of reminds me of that Moonaudio KSC-35 recable from awhile back.
__________________ SB Audigy SE/Zen Xtra 30GB/Philips AX123 PCDP-->>KSC-75, MX500, Cat .5 KTX-Pro1,SR60 "I string 'em up, I cut 'em down; Dare I say..." Team Recovering(yeah, right...) Head-Fi Addict "You say the hill’s too steep to climb
Climbing.
You say you’d like to see me try
Climbing.
You pick the place and I’ll choose the time
And I’ll climb
The hill in my own way."
my first pair of cables, 24awg silver plated copper with teflon insulation in a tri-braid covered in white techflex, switchcraft RA connectors, generic sub-mini for the headphone end
as for the sound, I knew i'd hear a difference, but i just never thought it'd be this much better, bulstered the low end, much less distortion at high volume levels, took away a lot of the muddiness i noticed in some tracks, better imaging, more detail, yadda yadda yadda, couldn't be happier with how they turned out, i think i'm hooked
go for it, its easy if you have any soldering experience, not to mention you can save yourself a ton of money, not to mention i had a blast doing it, i dunno, something very satisfy about pluging in something you just made and hearing how much better it sounds right away
Finally my HD580s have gone balanced! Now I just need to finish the amp
Specs:
Cable: Canare Starquad
Cover: Black techflex, red/black heatshrink on headphone end
Headphone end: Senn connectors from the group buy ground down with dremel, soldered, and glued. Not pretty but will sound better then any other solution.
Amp end: 4 pin Mini XLR. Talk about hard to work with. 4 Cables soldered onto contacts only 1mm appart.
__________________
My wishes are simple. I demand only the best - Oscar Wilde
. Let me know what you guys/girls think.
![[AK]Zip's Avatar](http://www.head-fi.org/forums/avatars/-ak-zip-20281.gif?dateline=1190932186)
. It sort of reminds me of that Moonaudio KSC-35 recable from awhile back.
In fact, I'm inspired try my hand at making some cables. 
Now I just need to finish the amp 
Linear Mode
