Hi Madman, EFN. =P
i finally come over here.
Posting some cable i ever made.
Some of my plugs
Canare Starquad Stereo Mini-Mini (Canare 4E6S + F12)
Some mini interconnect ( Built with Starquad and Generic plugs)
Silver coated 30 AWG cable, braided and put inside heatshrink. sound is ok, but sort of Dry compare to canare starquad.
EMU 0404 customize breakout (Metal D9 + EST Japan made 1/6" Female + Starquad)
Right : RCA-RCA with starquad and F-10
Left : Canare Starquad Stereo Mini-Mini (Canare 4E6S + F12)
RCA-RCA and RCA-1/6" phono (for EMU1212)
Left : F-10 (RCA) + Neutrik 1/6" (Phono) + Starquad
Right : RCA-RCA with starquad and F-10
PX-75?? the blue and shimmer techflex make me scared to bring it out as everyone will staring at it.
Cable is Canare L-2B2AT which is dual core, and aluminum foil + Fire wire shielded.
CAT-5 interconnect (as experiment, as according to van haus, it's best for speaker cable. but i just test it out, it;s a pain to fix it in to rean plug) sound is not as good as canare starquad. as i am not using Teflon coated CAT-5 , i infact using D-Link PVC insulated cat-5. hence it's just purely made for fun.
Recabled British air-way headphone. my cousin who work in british air way found they throw this away as the cable is torned. Recabled with 4E6S too.
so he pick it up and gave to me. and i recabled it. impressive bass respond. better bass than SR60.
MYbeloved humble setup =) Mini cable from creative zen micro to amp is starquad without shield, skin and yada yada. just bare.
while cable from amp to my headphone is canare starquad.
Cmoy with Starquad as internal wiring. found that it does improve the sound stage..
Silver coated copper mini stereo interconnect, extremely flexible. Has slightly less bass respond compare to 4E6S on my headphone (HP890)
3.5mm female-female interconnect (use for extension, or to change the plugs of interconnect of some of my cable, especially for my headphone cable)
Cable : Starquad
Plugs : EST 3.5mm Female Made in japan, Fit in Taiwan made Metal plug Barrer.
Stereo-RCA Starquad + REAN + F-10
Experimental cable of mini-mini interconnect
Top-> Below = Canare 4E6S, Belden, 4E6S, silver coated cable, SATO Microphone cable, Maruni Microphone cable, braided (9 line) 30AWG silver plated cable with teflon insulation, 4E6S bare cable with techflex, Braided (3line) 30 AWG silver plated cable with teflon insulation.
short mini-RCA , made with starquad
Latest creation, Rca-Rca , starquad also. Added ferrite ring to try out the improvement. from what i heard, no significant different in the sound signature. might be placebo. but it does look good, hence i leave it there.
Latest Creation, 0.5M stereo-stereo for me to connect external soundcard to portable speaker or portable amp. Plugs = Neutrik + Taiwan metal barrer. techflex added
Salute to members like RnB180, Hemberger, HiGHFLYiN9 and Edwood
i had learn a lot from u guys. though i didn't register and post, but i actually followed this thread a long time, and in fact i read from page 1 to page 80 when i started to learn how to do cable. =)
thanks for the knowledge you spread around. very appriciate it.
.
Linear Mode
