Support Head-Fi.org by
starting all of your
Amazon.com shopping by
clicking here.
____________________________________________________________________
Today's Featured Head-Fi Blog: A Japanese headfier's monologue (Sasaki)
____________________________________________________________________
Please help
support Head-Fi by becoming a Contributing Member
CLICK
HERE -- Contributing Members, thank you
for your generous support! --
looks like home grown audio 8 wire silver braid. 4 opaque conductors 4 transluscent conductors, teflon insulation 99.99% high purity silver,
I have a couple runs of it lying somewhere also.
or
enigma diy braided it himself its difficult to tell. that is some very nice DIYing btw
__________________ I asked Jesus, "How much do you love me?"
"This much", He answered. Then He opened up His arms and died.
-anonymous "As far as the laws of mathematics refer to reality, they are not certain; and as far as they are certain, they do not refer to reality."
-Albert Einstein my headfi feedback
Hey Karlosak, what did you use for yank protection on these plugs? Also, it seems that you just used the braided wire and tech flex without using any heat shrink or shielding... can I assume that you just used the cables' braid as interference shielding?
With GrandEnigma's help I was able to make a cable for the SR-60 I bought. its 24 AWG stranded silver plated copper covered in teflon. I used 4 strands and braided them using the litz technique. it's terminated with a small nuetrik 3.5mm jack that GrandEnigma was nice enough to send to me. the total length of the cable is 10'
With GrandEnigma's help I was able to make a cable for the SR-60 I bought. its 24 AWG stranded silver plated copper covered in teflon. I used 4 strands and braided them using the litz technique. it's terminated with a small nuetrik 3.5mm jack that GrandEnigma was nice enough to send to me. the total length of the cable is 10'
thanks again Grand
Looks good, where did you get the wire from?
__________________
Home Rig: Transit USB -> Headsave MiniMe -> Grado SR125 / Beyer DT990 Pro
I bought it from an ebay selelr (NAVships I beleive) his name comes up alot around here. he sells 50' for ~5-10 dollars (24/26 AWG) and shipping is very cheap if you buy more than one spool. He ships really fast too, I ordered like 250' worth of wire, he charged me like $4 in shipping and I had it a day after he told me it shipped
I call it......mini-mini cable o'crap. Lol, hey it works and barely cost anything. My first cable done. I knew it wouldn't be ahrd but I felt I should start off with something cheap and simple just to make sure I could. Sometimes its just fun to start from the bottom.
I bought it from an ebay selelr (NAVships I beleive) his name comes up alot around here. he sells 50' for ~5-10 dollars (24/26 AWG) and shipping is very cheap if you buy more than one spool. He ships really fast too, I ordered like 250' worth of wire, he charged me like $4 in shipping and I had it a day after he told me it shipped
navships ships SOOO fast. its crazy, idk how he does it. I like his wire too. I have bought several rolls. Some for audio and some for other hookup needs. The RCA IC's that I have are made of his stuff and it sound fine to me, no noticable problems at all. Although I'll prob replace it with starquad soon enough
__________________
TEAM SOLD IT ALL TO GET THE UE10 PROs
HERE :))) UE10 Pro
Sold/Retired/Used: Grado SR-80 Bling Edition, Grado HF-1, Sony MDR-V600, PX100, AT AD2000, Woddy DT770, Grado 325i, Gilmore Lite, Evilfire Cmoy, DIY millet with diamond buffers, Lite DAC-AH, Mod Linkwitz Crossfeed, Shure E4c, Ety ER4P
Linear Mode
