DIY Cable Gallery!!

[Armers]

Originally Posted by skyskraper

hey armers did u get the techflex locally? nice work btw...

Yep, If you want some gimme a yell I'll sell you some.

[ufokillerz]

that multi-filament techflex looks good on the cables.

[bg4533]

Cables to connect my new EMU 1212M to my Pimeta.
Each cable is 6ft of Canare Starquad terminated in a Canare F10 and F15 plug.

[skyskraper]

neutrik nc3-m/f-x, proel hpc210, techflex.
neutrik (rean?) black and gold 1/8", with techflex, on some weird old canare cable someone gave me a length of

[skyskraper]

and another pic


excuse not being able to show u the female end of the xlr's, i cbf unpatching them, so hard to get around the back....

[ElChupahueso]

Originally Posted by drewd

A couple of mini to mini cables - Switchcraft right angle and Canare F-12 with Canare Star Quad and multifilament TechFlex.The cable and cover is ever so slightly larger than the diameter of the Switchcraft plugs...it took forever to make that cable!

Just out of curiosity, on the IC with the F-12's, do you have the strain relief spring underneath the tekflex? Reason why I ask is because today when i was builidng my first one, (YAY! pics to follow with suggestions for the guide), I couldn't get the tekflex to fit under the strain relief, but now i think i might just try sticking the spring underneath it, and heatshrink the ends.....*thinks devious thoughts about building next IC...*

Decay

[HiGHFLYiN9]

SENN HD600 REWIRE
Sleeve: Teflon
Conductor: 22ga Silver plated copper
Config: Litz
Termination: Neutrik NP3C-B (Gold Plated) /Senn plugs


AKG K240S REWIRE
Sleeve: Teflon
Conductor: 22ga Silver plated copper
Config: Triple Braid
Termination: Neutrik NP3C-B (Gold Plated) /SW MiniXLR


BEYER DT880 REWIRE
Sleeve: Teflon
Conductor: 22ga Silver plated copper
Config: Litz
Termination: Neutrik NP3C-B (Gold Plated)

[Dreamslacker]

My take on the DT-880's. They belong to a friend.
BEYER DT-880 RE-WIRED

Wire: 2 x MOGAMI 2534 cable.
Configuration: Single run of cable per driver.
Termination: 2 x Neutrik Heavy Duty 3-pin XLR (NC3MX-HD).






Pretty connectors:

[Daroid]

1/4" TRS -> 2x RCA

Cable types:
Sommer Cable "Galileo 238" (dual conductor) for termination to the TRS.
Sommer Cable "The Spirit" (single conductor) for termination to the RCAs.
Sleeved into a standard RS nylon sleeve and heat-shrinked.

Connectors:
TRS: 1/4" PHX gold-plated jack, stereo, insulated.
RCAs: Cardas AGMO gold plated, not insulated.

Pictures:

[HiGHFLYiN9]

COMPACT RCA TO MINI
Sleeve: Teflon
Conductor:
SIGNAL: 24ga .9999 Silver
GROUND: 22ga Silver plated copper
Config: Dual Twisted Pair
Termination: Neutrik ProFi RCAs / Canare F-12
Approximate Materials Cost: $19