DIY Cable Gallery!!

[PsychoZX]

ttr. what kind of camera are you using? those pictures look fantastic!

[HiGHFLYiN9]

Wow Alex, you've been busy!!

I made a couple new cables today to integrate into my system. The first is a 5 foot pair of Cardas crosslink cable with Canare F-09 terminations, using Cardas solder of course . As Percy states in his catalog this is an excellent recipe for a budget interconnect. I build this cable to run from my television to a passive volume control which will then go to my switchbox so I can finally listen to movies and games with my headphones I haven't built the passive volume control yet, still waiting on a few more parts, but I'll try and post some pics when it's done.



Next is a cable I built in anticipation for my beyond-maxed PPA v2 that Thrice of Rockhopper is currently building me. I didn't want all those Black Gates to go to waste so I made this cable to a pretty high spec. It's a 3.5 foot pair made from Cardas wiring, Cardas solder and Vampire 800C pure copper RCAs, then covered with some fancy flex. Looking forward to hearing the vibes from this one.

[HiGHFLYiN9]

Alex, is there much of a difference between the Neutrik NP3C and the NP3X? I have to make an order at partsexpress soon and thought I would pick up a few up if they are pretty similar.

[ayt999]

Originally Posted by HiGHFLYiN9

Wow Alex, you've been busy!!

not really... the mini connector stuff I made early in the summer and the long white RCA IC's are from a while back (only changed the heatshrink colors and design on the RCA plugs). only the black RCA cable and XLR cable are the new ones I made recently.

they all are 8-wire braids btw, including the mini stuff.

as for the question about the connector, sent you a PM.

[DolbyR]

This my mini-mini interconnect for connecting the pc to my CMOY:






And the stuff i made it from [LQ pic]:



The cost was about $3.5

[ttr]

Originally Posted by PsychoZX

ttr. what kind of camera are you using? those pictures look fantastic!

Hi, thanks. My camera is Canon D30 with 100-300mm 1:5.6L lens and polarizer filter for removing reflections.

Those Cardas/Vampire cables look very sexy highflyin9.

[grandenigma1]

mini - 1/4" locking jack






...sorry for all of the bad pics... Im getting a new camera for Christmas

[jerb]

Fantastic Cable Enigma, looks great

[grandenigma1]

Originally Posted by jerb

Fantastic Cable Enigma, looks great

Thanks jerb!

[nikongod]

senn hd595's with noo cable.

4-strands 22ga black teflon/silver plated coper. about 6ft long.
black techflex.
neutrik 1/4" sterio plug.
removal of "sennheiser circuitboard" which formerly lived in the left earcup. ends of new cable go to wire through headband, and left driver directly. at least 2 solder points, and 1 mechanical connection removed from each line!

ooh, everyone loves pictures: