Dang. I was soldering last night and realized I had bought a huge gauge of solder wire at radio shack. Does anyone know where you can get jumper wires that are about the same size as battery connects in ipod (1G - I don't know if they're all the same)
Please refer to original post for the picture. I removed two components that were sitting where the wires are now, but I can't identify what they were. They looked kind of like diodes, but that doesn't make any sense to me.
Now I got it! You have 4th gen non colour ipod and I moded 4th gen photo ipod. Just checked again your pictures and the pads on your ipod definitely bigger then on mine.
Dang. I was soldering last night and realized I had bought a huge gauge of solder wire at radio shack. Does anyone know where you can get jumper wires that are about the same size as battery connects in ipod (1G - I don't know if they're all the same)
You mean Radio Shack doesn't carry any smaller sizes? I got my wire from navships on eBay, 30 AWG teflon 7 strand SPC. He has a huge selection, and has served head-fiers well over the years. Very reliable. The only caveat I have is that the 30 AWG wire is one size away from what my wire stripper can strip. 28 would serve you well, I think.
__________________
"Ears that hear and eyes that see - the LORD has made them both." Proverbs 20:12
Team University-fi | Team Edmonton-and-Surrounding-Urbanities(1)(2)
Hey joneeboi, i was gonna ask you. From your pictures it looks like you went from the "-" side of the capacitors to a new headphone jack...did you decide not to use the one that was built in??
Hey joneeboi, i was gonna ask you. From your pictures it looks like you went from the "-" side of the capacitors to a new headphone jack...did you decide not to use the one that was built in??
I did use a new headphone jack. I don't have a sufficiently portable amp yet (one that will fit into my jacket's breast pocket and isn't completely noticeable when I hug someone), so I decided to keep the original headphone jack intact. One major consquence of this design decision is that I have to somehow incorporate a new jack, which leads to an effectively larger player, which then leads to add-ons much like my diyMod 4G's rocket pack. At the same time, this affords the possibility of slightly larger (better?) capacitors than the original iMod's Black Gate NX Hi-Q caps, though Black Gate's NX line is already of high quality. I didn't have the Black Gates on hand, so I had to use some slightly larger, overspec'ed caps that required some method of stabilization. That's where the Tic-Tac box, mummified with electric tape to my iPod, comes in. I'll be making an order of Black Gates soon-ish. We'll see how that goes.
__________________
"Ears that hear and eyes that see - the LORD has made them both." Proverbs 20:12
Team University-fi | Team Edmonton-and-Surrounding-Urbanities(1)(2)
-great stuff!! iwas waiting for someone to offer a DIY of the imod...
-is anyone offering this service yet (besides vinnie)?
- if not, does anyone have any spare black gates cap they can sell me to try?
Just wanted to report that work has gone under way to make a tutorial for the diyMod 5G. The only thing is this board is much, much harder for me to figure out than the 4G click wheel. Basically, the trace is hard to find from the pin, and once I post some pics, you'll see what I mean. The dude at this page has picture of some very obvious caps that go to the headphone out, but I'm not finding a short between the line out pins of the WM8758 chip and either side of the caps, so I'll keep investigating.
The closest I came to anything was an increasing resistance between the line out pin and one of the pads of the huge capacitors, starting around 1400Kohms and slowly climbing up to 1600Kohms as I remove the leads. I suspect some current [from] the DMM caused this odd activity.
Opening the iPod video was difficult on its own, so beginners may want to take caution. This iPod is extra annoying not only in its complexity, but also in the ludicrous amounts of adhesive used. Once you remove some of it, it's near impossible to put it back to its previous effectiveness. It's not that the logic board necessarily needs that much adhesive as it's all pretty cramped inside anyway, but I guess Apple wanted to be doubly sure of its security.
This has gotten me to scratch my head quite a bit. I'm beginning to question whether or not it's worth the trouble. I know this feeling will pass, but it's greatly frustrating working into the wee hours of the night (wee for me anyways) with a full day ahead of you and getting nowhere. If anyone would care to open up their 5G and explore with me, that would be of great assistance. Better yet, if someone would open their 5G iMod...
Alas, my bed beckons me, as I have many pages and hours of studying tomorrow/today. Help would be greatly appreciated.
__________________
"Ears that hear and eyes that see - the LORD has made them both." Proverbs 20:12
Team University-fi | Team Edmonton-and-Surrounding-Urbanities(1)(2)
Great work J! Yeah, its good to get some sleep. I just tossed my 5G because of the MB and HDD failing....too bad! I could have opened it up and really not had to worry about anything. But whatever, im sure you will get the answers.
My click-wheel for my nano should be in today, so an iMod nano i should have hopefully by tomorrow night!...if I get time!
Thanks j! It looked like it. I'll do the same thing. Its easier.
Quote:
Originally Posted by wgr73
My click-wheel for my nano should be in today, so an iMod nano i should have hopefully by tomorrow night!...if I get time!
Wow, look at what I started. I hope this rocket pack thing doesn't become too common I personally don't mind the aesthetics of it, but never thought people would want to copy it. Interesting stuff. Hope all goes well for you this time around, wgr. Remember, bring on the pics!
__________________
"Ears that hear and eyes that see - the LORD has made them both." Proverbs 20:12
Team University-fi | Team Edmonton-and-Surrounding-Urbanities(1)(2)
You have 4th gen non colour ipod and I moded 4th gen photo ipod. Just checked again your pictures and the pads on your ipod definitely bigger then on mine.
