FS/Trade:M-AUDIO FireWire 1814 - Head-Fi: Covering Headphones, Earphones and Portable Audio

lovebell · #1 (**permalink**) 02-11-2006, 01:04 AM

The same reason as I am selling K3000s-need cash to complete my speakers set.
this is M-audio one of the top soundcards.
here are more details
http://www.m-audio.com/products/en_u...1814-main.html

18 x 14 FireWire audio interface

8 x 24-bit/96kHz analog inputs (1/4” TS)

4 x 24-bit/96kHz analog outputs (1/4' TRS/TS)

2 x 4 24-bit/192kHz analog I/O capability

8 x 8 ADAT Lightpipe I/O

digital S/PDIF (coaxial) I/O w/ 2-channel PCM

digital out also supports pass-through of AC-3/DTS surround-encoded content

dual mic/instrument preamps (Neutrik XLR/ 1/4” TS) with
• input level controls
• 20dB pad
• phantom power
• signal LEDs

two independently assignable headphone outputs with individual level controls (1/4" TRS)

flexible software-controlled mixing of hardware and software I/O

aux sends on all channels and aux output assign allows for dedicated headphone mixes and sends to external effects

user-assignable front-panel level control (output, input, software return, aux send)

near zero-latency hardware direct monitoring

low-latency ASIO software direct monitoring

momentary switch for A/B cueing two software-assignable headphone sources or switching ASIO monitoring on/off

1 x 1 16-channel MIDI I/O

wordclock (BNC) for sync to external devices

power on/off switch with indicator LED

powered via FireWire bus* or included DC power adapter

two convenient high-bandwidth FireWire ports

rugged steel construction

includes Ableton Live Lite 4 music production software, so you can make music right away

* requires 6-pin connection

line inputs (TS) 1-8

frequency response: +/- 0.1 dB, 22Hz to 22kHz

dynamic range: 105dB, A-weighted

signal-to-noise ratio: -105dB, A-weighted

THD+N: <0.00281% (-91dB)

crosstalk: -107dB @ 1 kHz

nominal input level: -10dBV

maximum input level: +2.1dBV, typical

input impedance: 10k Ohms, typical

mic/inst. inputs (balanced) 1-2 at minimum gain

frequency response: +/- 0.1 dB, 22 Hz to 22 kHz

dynamic range: 105dB, A-weighted

signal-to-noise ratio: -105dB, A-weighted

THD+N: <0.00281% (-91dB)

crosstalk: -105 dB @ 1 kHz

maximum input level: -3.8 dBu, typical

input impedance: inst in: 500k Ohms, typical; mic in: 1.8k Ohms, typical

adjustable gain: > 40 dB

pad: -20 dB

total gain range: +60 dB

line outputs (TRS) 1-4

frequency response: 192 kHz: +/- 1 dB, 22Hz – 80kHz
96kHz: +/- 0.5 dB, 22Hz – 40kHz
48 kHz: +/- 0.1 dB, 22Hz – 22kHz

dynamic range: 107dB, A-weighted

signal-to-noise ratio: -107dB, A-weighted

THD+N: <0.00301% (-90.5 dB)

crosstalk: -106dB @ 1 kHz

nominal output level: +4dBu balanced, -10dBV unbalanced

maximum output level: +10.2dBu balanced, typical; +2.0dBV unbalanced, typical

output impedance: 150 Ohm

load impedance: 600 Ohm minimum

headphone outputs at maximum volume into 32 Ohm load

frequency response: +/- 1 dB, 22Hz to 22kHz

power into Ohms: 16 mW into 32 Ohms

THD+N: <0.04987% (-66.1 dB)

signal-to-noise ratio: -96 dB, A-weighted

max output level into 32 Ohms: -3.0dBV, typical

output impedance: 75 Ohm

load impedance: 32 to 600 Ohms

word clock

output: up to 192kHz

input: up to 96kHz

pass-through I/O: up to 96kHz

impedance: 75 Ohms

analog sampling rates: 44.1kHz to 192kHz for analog input 1/2 and all analog outputs
44.1kHz to 96kHz input on channels 3-8

digital sampling rates (kHz) 44.1, 48, 88.2, and 96 for coaxial S/PDIF in and out
44.1 and 48 for optical S/PDIF in & out
44.1, 48, or 88.2, 96 for ADAT I/O in S/MUX mode

the condition is 9/10 rate, I have original everything,box ,paperworks etc.

Paypal ,money order acceptable.
My feedback is in my sign.
Please pm your offers if interested
thanks.