Pics are now included!
FEATURES
* Four Digital Inputs
* Gold-plated audiophile jacks
* De-Emphasis Circuit
* Balanced Analog Outputs
* Gold-clad precision relays
* FR4 glass circuit boards
* Low Jitter Crystal Receiver
* Three Separate Power Transformers
* Digital Record Output Jack
* HDCD
* Process Decoder
* Regulated Power Supplies
* Precision Resistors
* 4 Burr-Brown PCM 63-K DACs
* Polarity Inversion Switch
* Precision Capacitors
* IEC removable AC cord
* Silver-plated wiring
* Heavy-duty chassis
SPECIFICATIONS
* Frequency Response:
2 Hz - 20 kHz, I0.25 dB
* Signal to Noise Ratio:
> 108 dB, 113 dB typical
* Channel Separation:
> 100 dB @ I kHz
* Total Harmonic Distortion:
< 0.0015% @ 1 kHz
* Total Harmonic Distortion:
< 0.0015% @ 1 kHz
* Amplitude Linearity:
> 100 dB; 102 dB Typical
* Phase Linearity:
+/- 0.1 deg @ 20 kHz
* Maximum Jitter:
< 50 picoseconds RMS, using selected low jitter Crystal
8412 Digital Interface Receiver
* D-A Converters:
Four Burr-Brown PCM 63P-K (highest grade) 20 bit,push-pull for each channel and fully balanced digital operation
* Oversampling Rate:
8 X (352.8-kHz)
* Digital Input:
32 kHz, 4.1 kHz, 48 kHz; Consumer standard SPDIF
* Digital Filters:
PMD-100 High Definition Compatable DigitalDigital Process Decoder
* Absolute Polarity:
0 deg or 180 deg switchable
* Digital Inputs:
o Coaxial:
75 Ω RCA
o TOSlink fiber optic:
EIAJ Standard CP-340/RC-5720,660 nm typical wavelength
o ST module fiber optic:
AT&T Standard, 820 nm typical wavelength
o AES/EBU Balanced XLR
* Outputs:
Unbalanced Analog Line Out: 3 V nominal, 600 Ω
Balanced Analog Line Out: 6 V nominal, 1.2 k Ω
Digital: 750 RCA coaxial, 0.5 V peak-to-peak
* Power Supplies:
3 separate transformers and nine regulators for digitalcircuits and for each analog channel
* Power Requirement:
120 V, 60 Hz, 18W; may be re-wired for 220 - 240 V, 50 Hz
* Dimensions:
19" W x 3" H (3 5/8 with feet) x 13 1/8" D
* Net Weight:
13.5 lb.
|
