I ended up with enough leftover parts to build an entire extra
AlienDAC. There is
no casework with this. It's just the populated board, no output jacks or case are included. Also not that
CL/CR positions are not populated. I believe in doing DC filtering at the amp, so better matching can be done with the filter caps. If you need to use this with an amp that doesn't do DC filtering, be prepared to populate these yourself. Selling for $55USD plus actual shipping via the method of your choice. Payment via PayPal.
Configuration as follows:
- REG101's in both positions, IC3 set to 4.75V
- Panasonic FM in all electrolytic positions, 1000µF C2, 47µF C13, 68µF C23/C33
- R15/R16 populated in case you want to add CL/CR
- RLED populated, 604R, I can include a 3mm low current red LED soldered on the board if desired
All the SMD work is done for you! Wanted to build one of these but scared of the SMD? Here ya go...
PM if interested or if you have questions. Sorry, no pics at the moment, my camera is on loan. I will post some Monday.
FS: AlienDAC - USB powered, no casework
