Support Head-Fi.org by
starting all of your
Amazon.com shopping by
clicking here.
____________________________________________________________________
Today's Featured Head-Fi Blog: Jude's Blog
____________________________________________________________________
Please help
support Head-Fi by becoming a Contributing Member
CLICK
HERE -- Contributing Members, thank you
for your generous support! --
I think that I am going to invest in some parts to make a few cables that I want/ need.
I am going to buy:
- 5M/10M of Silver encased in Teflon (havent decided how much)
- 4 RCA plugs
- White Heat shrink (need also for depodding im716)
- WBT Silver Solder
- Disasemble cheapie iPod breakout cable for the dock connector.
- Mini Stereo plug
What I want to try and make my own set of silver RCA cables and a very small LOD for my iPod Touch that is very short.
I am thinking that I might be able to get away with 5M because I only need the RCA cables to be 3 feet and that extra cable could be used for the LOD since I want the cable portion to only be about 1.5/2 inches.
Right now, the RCA plugs I am looking at can use compression or solder... which is better?
Is this a good idea? I would be investing ~$40 (after some very careful shopping).
Or should I just get a pre-made set of silver RCA cables for $25 off ebay?
Would this be worth the trial and potential error?
Thanks for responding!
*BTW: I have done soldering for class (CompEng.) and basic Cmoy's*
__________________
Home: Auzen Cinema/ Marantz CD5001 -> Zhaolu 2.5 -> Upgraded Millet Min SS-> recabled AT-701/recabled K400/Heavily Modified Pioneer SE-505
Portable: iTouch 16GB -> Crystal Silver 5 wire Cryo LOD -> Pico -> FreQShow
Other: HD495, Px200, pe-117, FreQ cable on ER-6i
Come and Gone: HD590, AT-ES7, HD580 x2, SR80, im716, MisterX XP Portable and Home versions, ALO LOD, LDM+ Damage: $1350.65
Team Facebook-Fi, Team FreQ, Team College-Fi, Team Out-Of-Production, Team Girl-Fi, Team GO-U-NORTHWESTERN! My Feedback: http://www.head-fi.org/forums/f12/germania-287455/
Mods: The SitheiserFahrenheit-75Sitheiser 2.0FreQShow Cryo Recable
If you want experience making cables, I'd recommend doing what you're planning.
If you really don't want to put effort into it, then buy cheaper cables off ebay.
__________________
- Statement of Cashflows - Team Orthodynamic -
Current setup:
Meizu M6 Miniplayer >> Little Dot MK1 >> YH-100 open customs or KSC55
Retired:
KSC75, Accura SR660 Drivers, Frankenstein SR-55x
I'd say, it'll be worth the DIY perspective and you will learn a lot from the trial / error for sure!
one thing... silver encased in teflon, depending on how thick and much... will possibly restrict you from "bending" it nicely (a U shape) for an LOD, the shorter it is, the worse the bend becomes (or harder)
__________________ Current Head-Fi'ed:
Desktop Setup:Apple Macbook + Apogee Duet + AKG K701
Stereo Setup: Sony CDP C245 + Panasonic CA1060x + AKG K701
Portable Setup: Samsung P2 + Super FreQs
Hi Germania is it possible to please post where you buy the wire and parts when you decide on parts to order? I'm thinking of doing the same thing thank you
You should definitely go the DIY route if you're willing to make the investment. At the very least, once you get some soldering experience, you can outfit your system with cables you've made yourself, and possibly upgrade some of your gear. The problem is that all those boutique wires, solders, connectors etc. often end up costing quite a pretty penny, so I wouldn't really consider it a $ saving proposition, but you have a lot more control over the final product. It's always reassuring to know that your cable has perfect joints, good strain relief, and high quality components, rather than purchasing it from some random person, hoping they took the time and care that you would have.
Anyway, good luck, and hit us up on the DIY forum if you run into any hurdles.
__________________ Cans: AH-D2000 ◦ K240S ◦ DT990 '05 ◦ MS-1 ◦ MS-2i Amps:Little Dot II ◦ Pimeta ◦ Rockhopper M3 ◦ WooAudio3 Sources: Ack dAck 1.3 ◦ PCD-300A ◦ S-100 mkII ◦ X-DAC v3 ◦ Xpression III + VP129 Portables: iRiver iMP-550 ◦ Microsoft Zune ◦ 1G Shuffle ◦ Sony D-EJ2000 Speakers: NHT Classic Three Bookshelves ◦ RC Line Arrays + Newform Ribbons My Feedback ● Team Cable DIY ● The Anime Thread ● The Video Game Thread
DIY: First Time with cables. Crazy?
Linear Mode
