Yes, I can attest to the configuration working since I built my cable awhile back from that exact same link. As far as I know Ken never had it right to begin with since his configuration required the iPhone to be rebooted etc...Upon multiple requests for the pinout from various people here, he never did supply any info to help!
Pinouts for Dock connector:
Pin 2: GND
Pin 3: Right Channel Line Out
Pin 4: Left Channel Line Out
Pin 11 should have a 1K resistor between it and pin 21, and also a jumper wire from pin 11's end of the resistor to Pin 30 of the dock. I've been using this for awhile and it works fine.
__________________
HOME/PORTABLE SOURCE: Apple 16Gb iPhone, IPod Video 30Gb
CABLES: My own custom built Cardas LOD for iPhone
AMP: Qables iQube
IEM: Ultimate Ears UE-11's
|