[iQEM]

Originally Posted by ruZZ.il

You should remove all the unused pins in the dock to begin with, it'll be easier to work worth and supposedly reduce some in interference. Anyway, multiple strand wires can pe "shrunk" by exposing lets say 0.1" of strands then cuttings about half(or whatever) of them down to lats say only 0.03" bare so you're left with only 5 or 6 strands, then tin the wire so it'll ensure good solid contact to all the strands. use little bits of heat shrink that you put on te wire before to ensure the wires don't touch each other when they're so close inside the dock connector..

pin 1 as mentioned is internally connected to pin 2, so I assume their use is interchangeable.

(Also note that some site count the pins from a different size, so if you were looking here for example, you'd be using pins 23, 78, 29/30. )

yes, are there any other site than ipodlinux to check dock_connector pins to use ?